详情
Product: DIN 1.***4,AISI L6
Key words:ool steel,die steel,specialty steel,steel
bar,hotwork,coldwork,forged bar,alloy tool steel,flat bar, round
bar,
Typical Analysis:
C : 0.***0.*5
Si : 0.***0.*0
Mn: 0.***0.*0
P : Max
0.**0
S : Max 0.**0
Cr: 0.***1.*0
Mo: Max 0.*0
Ni: 1.***2.*0
Similar Grades:DIN 1.***4, GB/T 5CrNiMo
Advantages:
Good toughness at lower hardness lever.
Good wear at high hardness lever.
Application:
L6 was designed for general purpose tools where greater toughness
is required, such as forming rolls, punches, blanking dies, shear
blades,and spindles.
Machinability:
L6 has a machinability rating of *5% of a 1% carbon tool steel.
Annealing:
L6 should be annealed at ***0°F and held for one hour per inch of
thickness. Cool at *0°F per hour to **0°F and then air-cool. A
maximum hardness of **7 Brinell should be obtained.
Hardening:
L6 should be preheated to ***0°F then heated to ***0°;to ***0°F
and held for one hour per inch of thickness. Quench in oil to
**0°F followed immediately by tempering. L6 can also be air
quenched in sections less than 1" thick.
| 国家: |
China |
| 型号: |
DIN 1.2714, AISI L6
|
| 离岸价格: |
（面議）
获取最新报价
|
| 位置: |
China |
| 最小订单价格: |
- |
| 最小订单: |
5-10mt |
| 包装细节: |
- |
| 交货时间: |
- |
| 供应能力: |
1000mt/month |
| 付款方式: |
- |
| 產品組 : |
- |
