DEF Automatic Nozzle, AD BLUE NOZZLE, DISPENSER NOZZLE

详情

Specifications
Due to the highly sensitive nature of AdBlue/DEF,AILE developed Adblue/DEF Automatic Nozzle in an effort to avert contamination. 


DEF Automatic Nozzle

Due to the highly sensitive nature of AdBlue/DEF,AILE have developed specific dispensing nozzles in an effort to avert contamination.
Adblue automatic nozzle features a device that stops the flow when the tank is full.

Spill free delivery into the Vehicle requires the use of an Adblue automatic Nozzle.

Due to popular demand, the *1A nozzle is now produced entirely from stainless steel and features a three position trigger latch which provides varied flow conditions for different sized Adblue/DEF tanks.

Note: Prevents mis-fuelling of AdBlue/DEF into Diesel tank

 

Specification                                                

Filling Nozzle   Automatic trigger nozzle with safety cut out valve                                                                  

Mechanism :       *-speed lever latch                                      

Materials of construction: Stainless steel,Viton                

Fittings:         BSPP3/4" , NPT 3/4" inlet                                                                                    

Flow range:      ****5 liter/min                                                

Max pressure:     5 Bar                                        

Diameter :       *9mm                                            

Colour :          Blue     

 

Before beginning installation of the product, please carefully read all warnings. 
• Follow all manufacturer’s instructions.
• Use safety cones to mark-off work area.
• Shut off power to the dispenser and close the emergency shut-off valves under the dispenser.
Relieve system pressure before servicing or replacing dispensing products, such as nozzles, swivels, or breakaways. 
• If nozzle replacement, remove old nozzle with a wrench. Carefully drain fuel from hose & nozzle into approved container.

 

REMOVAL OF THE HOLD-OPEN LATCH ON
THE NOZZLE
• If local codes require that the nozzle cannot have a hold-open latch, please follow these instructions to remove the hold-open latch.
• Verify dispenser is turned off.
• Place the nozzle on a flat surface. Hold lever in open position and insert a flat-bladed screw driver along side of the hold-open rack. Pry the rack upward and off the rivets.
CAUTION: Protect your face and other exposed body parts;wear safety glasses.
• Make sure broken rivets are removed from the guard. Throw away old parts.
• Do not alter the trigger or rack mechanism from its original configuration. The nozzle shut-off mechanism could be impaired as a result.

Only use authorized AILE repair kits.