Gypsum powder production line introduction:
We use the advanced technology to produce the gypsum
power machine from *0,**0 tons per year to **0,**0 tons
per year
Plaster of Paris production line
The gypsum stone is crushed into granule less than *5mm with
crusher. It is stored in raw material silo, then conveyed into
grinding mill to make gypsum powder. The powder is classified
through a classifier. The qualified powder in required fineness
shall be carried to the calciner, while the unqualified powder
shall be returned to the grinding mill for further process. The
calcined gypsum powder (it is usually called Plaster of Paris)
shall be stored in the finished product silo for preparation of
plasterboard raw material.
Gypsum powder production line calcination process
The calcination is the important part during the whole system;
our company develops a new advanced equipment**-boiling system.
The boiling furnace body consists of delicate and intensive
cooling coil pipe. Put the heat conductive oil in the pipe, and
release the heat into the inside of furnace. There is a Roots
blower under the bottom of boiling furnace, and blow the air
into the furnace, until blowing the powder into boiling status.
Under a certain temperature, the dried and dehydrated powder
become light, and flow to the outlet automatically. The quality
of this kind of gypsum powder is stable
The Characteristics and Performance of plaster of Paris machine
Simple structure, it is not easily broken
Occupy small room
With low energy consumption
It can produce good performance gypsum powder
With best dust collecting
