KITAPON re-usable adhesive rear projection film screen built-in cling

详情

KITAPON is a complete range of adhesive rear-projection foils, that are stuck ONLY WITH WATER, and not with chemical or solvent adhesive. It can be stuck, then peeled off, then stuck again, and again...

KITAPON is cost effective and eliminate the risks of traditional adhesive projection screens (bubbles, specialist intervention for mounting, wrong positioning of the screen...). If you need to change the location, if the mounting surface was not clean enough, or if there are still some little imperfections... just unpeel it and do it again.
-KITAPON is cost effective: you can unstick it in seconds and use it in another place, the material is never wasted, even if you move the complete installation.
-KITAPON is easy to use for non professional people: you just need a small "squeegee" and a spray of water, that's it ! Light and easy to transport, it can be stored in a tube.
-KITAPON is a very flexible display friendly solution: when total window display and product focus is necessary, simply peel off and store.
-And, KITAPON gives the brightest results in any light conditions !

KITAPON can be use for digital signage, shop window installation, and interactive or touch displays.

We have several KITAPON available versions:

UX BLACK
A Premium high-contrast black projection film, for images with more depth even with very high environmental light.
It is our most contrasted film, with a natural black background for respecting original colors. Wide angled.
Uses: outdoor, shop-windows, digital signage, home cinema
DARK
A high-contrast dark grey projection film, for high impact in high ambient light.
Almost as contrasted as the UX screen, but with less angle.
Uses: outdoor, shop-windows, digital signage
CONTRAST
Contrasted grey projection film. It is the "all terrain" screen: perfect balance between luminosity and contrast, wide angle, natural colors
Uses: shop window, fairs, exhibitions, museums
DIFFUSION
White projection film. Emitted light has an *7% rate of diffusion on the screen superficy, which make DIFFUSION very suitable for mounts with short range optical projectors. No hot spot.
Total respect of natural colors
Uses: interior installation, exhibitions, museums, architecture
HOLO-G
Transparent projection film. Holographic foil with transparency > *0%. No projection = almost total transparency. See-through and holographic effect.
Uses: designed for special effect (pepper ghost, 3D...), and use in controled ambient light.
We do not recommend it for daylight use in full sunlight.
**0º
White projection film. This is a rear projection film that includes a reflective layer: the image can beseen on both sides of the foil.
Uses: bars and restaurants, museums, exhibitions
Note: as image can be seen on both side, one is seen as a mirror image. Be aware of possible rear-illumination of the screen by ambient light in case of shop window use.
FRONT
Light grey. An adhesive projection film for frontal projection. **0% opacity.
Uses: board room, exhibitions, architecture