led cold storage light

The characteristics of the LED cold storage lamp:

  The traditional cold storage lamp is low energy efficiency, such as metal halide lamp, high pressure mercury lamp, filament lamp, fluorescent lamp, energy saving lamp and etc, compared with the LED lamp which are high power ,low intensity of illumination, low working lifetime, air leak and hydrops. Because of the high power, the working temperature of the lamp wick needs more than **0 degrees to output the high luminous flux. In the low and damp environment, the temperature of the lamp wick can not satisfy this condition, so the lamps are slow start, low brightness, low lifetime and the lamps will burst if we start frequently.     

The energy saving lamp and the fluorescent lamp can be lighting, but the tube must reach the base temperature to excite the fluorescent powder. Below *0 to *0 degrees the both energy-saving lamps and the fluorescent lamps are very difficult to start, more difficult for the normal operation.

The cold storage will produce much moisture when it is xerantic, the moisture leads to large temperature difference between inside and outside of the incandescent lamp, so the incandescent lamp and the energy-saving lamp is often broken. It means the common lamps can not us e in the cold storage. LED is one kind of semiconductor luminescent material and self-luminous cold light source, the temperature is lower and it is better for the LED shine. The lower temperature also can reduce the light degradation and the spoilage rate, effective increase the working life .In addition, the LED is also belong to the switching device, so it is not any effect if you start and close frequently. LED lamps are the best choice for the cold storage.

The LED cold storage lamp can be widely used in the oil products low temperature storage; the logistics store cold storage, the chemical industry cold storage, medicine cold storage, the food industry cold storage, war industry and military cold storage. The temperature is **0℃ to **5℃ storage.

Waterproofing and Moistureproofing process:

Material/Craft: The outer cover is the refrigeration storage special anti-explosion cover, the light source is the LED cold storage lamp.

Waterproofing /Moistureproofing process: The complete set of lamps includes the sealing washer and quick lock sliding washer. The sealing washer outside have grease, the grease is sticky in low temperature environment, so it is effective to ensure the tightness of the washer and the complete set of lamps.

Installation/maintenance: The anti-explosion outgoing line connect **0v directly, the fixed anti-explosion cover can be used directly.

 

Advantages of the JM LED Cold Storage Lamp:

1.The outer cover is made of low shrinkage not saturated polyester glass fiber reinforced plastic, with the nice appearance, light weight, open and close flexibly, use safety simpler reliably, insulation, antiflaming, impact resistance and antiseptic advantages.

2.The light transmitting cover adopt the cold resistant PC material ,on the basic of the original cover we introduce the newest and microthermal plasticizer and inhibitor, avoided easy breakage problem, with impact resistance and high light transmittance advantages.

3.Long working life: The lamp body adopt the heat dissipation over-all structure, so the working temperature is down to the best point .The working life is ****0 hours , and it can non-stop work more than ****0 hours.

4. High efficient and energy-saving: Compare with the fluorescent lamp and common energy-saving lamp, it can save electricity *0—*0% and ******0%.

5. Instant-on: response time is **0ns,open and close frequently does not impact the working life,*0 degree below also can instant start.

6. Non-pollution: all the material adopts the non-pollution, non-mercury and non-lead.

7. Anti-explosion: The over-all structure adopt the safe design and against breakage. 

8. Standard lamp socket: E*7 lamp sockets, easy replacement, replace the fluorescent lamp and common energy-saving lamp directly.

9. Adopt the Nichia LED SMD bead, high lighting effect, low brightness decay.