详情
a. Applications of Manual
Molding Silicone Rubber
Manua
l Molding Silicone
Rubberis mainly used for model design of manual
mold, PVC plastic molds, cement products, low melting point alloy
molds, alloy toys, plastic toys, electronics, handicrafts,
stationery, large-scale sculpture, reproduction of cultural
relic, shoe sole molds, pad printing allocation, Electronic
equipment antivibration, etc.
b. Mode
l Codes ofManual Molding Silicone
Rubber
HY***8# is applicable to make molds of smaller
products and the production will be **3 pieces.
HY***0#, compared to other two types, for its
moderate hardness and better quality & performance, its
production will be ****0 pieces.
HY***0# is applicable to large size products
duplications andElectronic equipment
antivibration.
c. Brief
Description/Features of Manual Molding Silicone
Rubber
Manual molding silicone
rubber
1. Good
elasticity
2.
Non-deformation
3. Heat
resistance
4. Low
shrinkage
d. O
peration Instructions forManual Molding Silicone
Rubber
RTV*2 Manual Molding Silicone
Rubberis a
flowable liquid, and the quality has nothing to do with the
color. It consists of two component. Part A is a flowable liquid
silicone rubber, part B is the curing agent. Firstly, after your
previous work of dealing with the original model, take some
liquid silicone rubber , add 2%*3% curing agent of the amount of
silicon, and mix them evenly. Then after vacuum-pumping the
mixture, you can pour it into the mold frame. The silicone mold
will cured in **3 hours.
Note:The time for vacuum-pumping should be less
than 3—5 mins ,otherwise, once the silicone rubber has cross-link
reaction during vacuumizing, it will not be operated.
FAQ
of manual molding silicone rubber –
How to prevent silicone manual
molds getting sticky?
The main reason for this problem
is that you do not handle the products or original molds well,
then you should deal with the original mold or products carefully
before molding. Such as for the products with a complicated
pattern or a unsmoothed surface, you should polish and clean the
products after which it will be molded ,then spray the release
agent. Normally, the release agent can be Vaseline , detergent.
liquid wax Etc. In practical process, you can bush different
release agent according to different material.
The second reason is that the
operator pour the silicone into the mold when the mixture is
mixed evenly, then the finish silicone mold will not cure and dry
entirely.
Further information
onManual Molding
Silicone Rubber is available. Please feel free to
contact Aaron
SHENZHEN HONG YE JIE TECHNOLOGY
CO., LTD
ADD: Liulian Shibi
industrial, Pingdi town, Longgang district,
Shenzhen, China
Tel:
*****************6
Mobile:
***************1
Fax:
****************0
Skype : aaronxu9
| 国家: |
China |
| 型号: |
528#/540#/570#
|
| 离岸价格: |
4.6 ~ 5.6 / Kilogram （面議）
获取最新报价
|
| 位置: |
Shenzhen, Guangdong Province, China |
| 最小订单价格: |
4.6 per Kilogram |
| 最小订单: |
200 Acre |
| 包装细节: |
25kg/drum 200kg/drum |
| 交货时间: |
within 3 days |
| 供应能力: |
8 Ton per Day |
| 付款方式: |
L/C, T/T, Other |
| 產品組 : |
Manual Mold Silicone Rubber
|
