离岸价格
获取最新报价55 ~ 120 USD / Set
|50 Set Minimum Order
国家:
China
型号:
YS-S013
离岸价格:
55 ~ 120 USD / Set 获取最新报价
位置:
china
最小订单价格:
55 per Set
最小订单:
50 Set
包装细节:
foam plastic board, plastic bag and strong carton
交货时间:
according to your quantity
供应能力:
10000 Set per Month
付款方式:
T/T, L/C
產品組 :
-
China
联系人 Ms. flora
Ning'an Mansion,No.170,City Center North Road,Economic Development Zone,Xiaoshan,Hangzhou ， Z, Hangzhou, Zhejiang
1) make plywood door (including fiber board door), borders and cross rib must be in same plane, surface and border and cross rib should be cemented pressure. Should be in cross rib and, under the MaoTou drill two or more air holes, avoiding damp come unglued or burst up.
2) the door production quality, should meet the following requirements:
(1) the surface should be clean light or scrub, and shall not have dig mark, burr and hammer to print.
(2) box, fan linear should comply with the design requirements, cut Angle, flat-fell seam should be firmly sealed level off.
(3) the little material and the short expected plywood door and plywood or beaverboard doors don't allow come unglued. Plywood not allowed to dig through the surface veneer and Cha kung.
(4) the door make the allowable deviation, shall conform to the provisions of the table 5.**1.
| 国家: | China |
| 型号: | YS-S013 |
| 离岸价格: | 55 ~ 120 / Set 获取最新报价 |
| 位置: | china |
| 最小订单价格: | 55 per Set |
| 最小订单: | 50 Set |
| 包装细节: | foam plastic board, plastic bag and strong carton |
| 交货时间: | according to your quantity |
| 供应能力: | 10000 Set per Month |
| 付款方式: | T/T, L/C |
| 產品組 : | - |
