China
联系人 Mr. zhaoyuan
Haidian South Road, Beijing, Beijing
Reinforced Thermoplastic Pipe is one kind of high
pressured plastic compound tube, consisted of three layers, the outer layer and liner are a PE*0 or PE**0, the outer layer according to needs to be possible to choose the white color (on the ground against ultraviolet ray) or the black color (under ground), the intermediate layer is the enhanced tape, the reinforced material may be the polyester fiber or the aramid fiber and so on. The pipes use many kinds of connection forms such as enhancement inline coupling, swaging fitting, flanged joint to connect. The RTP pipe general application temperature for **2ºC~**5ºC, the max operation pressure may reach *2MPa most greatly.
Advantages of RTP pipe
1.
Anticorrosion
The walls both inside and outside of the RTP pipe have the good anticorrosive property, thus made it suitable in many kinds of corrosive medium and each kind of corrosive environment. (Reference standard:TR**9 thermalplastic piping for transport of chemicals)
2.
High pressure resistance
The RTP pipe has the high loading capacity. By choosing different enhancement material, the maximum service pressure may achieve *2MPa, and the bursting pressure may even reach as high as above **0MPa.
3.
Heat resistance & thermal insulation
The RTP pipe's application temperature scope is - *2ºC~1*5ºC, may satisfy the temperature demands of the majority situations, and the thermal conductivity is only 0.*8w/m*k, which is the 1/1*0 of steel pipe.
4.
High transportability
The inner wall of RTP pipe is very smooth, hard for scaling and wax precipitation, the flow resistance is low, high wear-resistance, delivery capacity lasting invariable, so the transported pipeline's maintenance cost is reduced.
(1)The material of RTP pipe's inner pipe is polyolefin, so the roughness equivalent of inner wall may reach 0.*5mm, but under ordinary circumstances steel pipe roughness equivalent achieves 0.*9mm, the used steel pipe even reaches 0.*0mm.
(2)RTP delivery capacity surpasses the conventional pipeline *0%.
5.
Abrasion performance
RTP outer and inner pipe's material and steel *0° tilt angle of wear test (mud jet velocity *4m/s)
Material | /mg mass loss/mg | /mm3 volume loss/mm3 |
PE**0 | *0 | *1 |
PE*0 | *2 | *3 |
steel | ***1 | **8 |
iron | **2 | **3 |
polypropylene | **3 | **0 |
PVC-U | **2 | **4 |
RTP RTP pipe |
Steel pipe |
Stainless steel pipe |
,GRP pipe, composite metal plastic pipe | |
Antiseptic treatment |
No deed |
Need |
No deed |
No need |
Antiseptic effect |
Entirety anticorrosion |
,Pitting corrosion | ,S,CO2Entirety,but not good effect for anti S, CO2 |
Entirety anticorrosion |
Life |
*0 Over *0 years |
*0 Within *0 years |
*2 *2 years |
*0 *0 years |
Scale formation |
hard for scaling |
Scaling |
Scaling |
Scaling |
Capacity of fluid transportation |
,*0% Smooth Inner wall Raising *0% |
, Non-smooth Convention |
, Non-smooth Convention |
, Non-smooth Convention |
Leakage |
No leakage in whole pipeline |
Easy leaking |
No leaking |
Easy leaking |
Qty of joints |
Few |
More |
More |
More |
Delivery |
In coil |
Straight |
Straight |
Straight |
Installation equipment |
,Light , a few of categories and quantities | Heavy and more quantity | ,Heavy, a few of categories and more quantity | |
Installation efficiency |
,3km Laying down at least 3km/ each day |
1 Laying down within 1km/ each day |
1 Laying down within 1km/ each day |
1 Laying down within 1km/ each day |
Installation in site |
,, 1engineer, 2 technical workers, some auxiliary staffs |
国家: | China |
型号: | - |
离岸价格: | ( Negotiable ) 获取最新报价 |
位置: | - |
最小订单价格: | - |
最小订单: | - |
包装细节: | - |
交货时间: | - |
供应能力: | - |
付款方式: | T/T, L/C, D/A, D/P |
產品組 : | Pipe |