EE Polypropylene fibers
Meshis made from modified
polypropylene, with processes of squeezing, stretching, networking,
surface modification, chopping etc. The fiber is of network
structure resulting from several cross-connected monofilament
fibers. When cast into concrete, the
PP fiber Mesh is squeezed and torn into two head hook-shaped
monofilaments connecting with each other and distributing
multi-directionally, so as to enhance adhesion capacity of the
fiber and concrete
Physical parameters
Type: Mesh
Color:
White Density:
0.*1kg/m3
Tensile
Strength: ≥**0Mpa Fiber Length:
****0mm
Melting Point: ******0℃ Security:non-toxic
Moisture content: Acid, Alkali & Salt Resistance:very high Electrical Conductivity:very low Moisture absorption:
non-absorbent ApplicantImprove the impermeability of
concrete Improve the anti-cracking ability of
concrete
Improve the impact and fatigue resistance of concrete
Improve the wear-resistance of concrete
Improve the plastic deformation ability of concrete
Strong resistance against acid and alkali, excellent
stability.
EE Polypropylene fibers Mesh is
widely be used inconcrete pavement, bridge deck, airport runway,
mine wall, roof, tunnel, dam, dike, wharf revetment, reservoir and
other
industrial and civil building. 5. Advantages Easily spreads around in mortar or
concrete Easily use Fine economic property Stable chemical property Strong acid and alkali
resistance 6. Usage: Dosage:0.**1.5 kg /m3 Length:generally, proper length of
the fiber added into the concrete is *9mm Mixing
Process:Crushed
stones, fiber will fully spread and then add cement and water and
stir normally .the addition of materials also can be put into as
usual .but the stirring time should be properly prolonged to more
than 4 minutes to make fiber completely mixed. 7.
Packaging 0.*0Kg/Degradable bag or *8kg/Bag or
**0Kg/Bag, Carton, Pallet, Ton
bag is available.
