详情
Molding Silicone
Rubber HY**0 Application:
Molding silicone
rubber HY**0 is suitable for small
products or fine and precision products which is difficult to
demould. This molding Silicone Rubber is one of the products with
the highest use level in the production of craftwork gifts and
the shrinkage is up to2‰.
Molding Silicone
Rubber HY**0 Description:
Molding Silicone
Rubber HY**0 is mainly used fortoy
giftsandcraftwork
giftswith the advantages of good
tensile strength, high tear strength, high temperature
resistance, high duplication times and repeated use,
etc.
Molding Silicone
Rubber Standard Datasheet:
|
Model
|
HongYe RTV
**0#
|
|
Appearance
|
white
|
|
Mixing Ratio
(%)
|
**4%
|
|
Operating time (mins
*5 0C )
|
*0~*0
|
|
Curing time(hours *5
0C)
|
2~5
|
|
Hardness
(A°)
|
*0±2
|
|
Viscosity (Mpas **5
0C)
|
****0±***0
|
|
Tear-strength(kN/m)
|
≥
*8
|
|
Tensile
strength(Mpa)
|
≥
3.3
|
|
Elongation-break(%)
|
≥
**0
|
Molding silicone
rubber Operation Instruction:
Molding silicone rubber is
white or red flowing liquid with general hardness of ****2A°after
curing . If the customer wants to make large products and large
size molds, the mold should be made of silica gel with high
hardness. On the contrary, if the mold with fine and precision
patterns , it should be made of liquid silicone with low
hardness. The amount of the curing agent depends on the actual
requirements of the customer. If molds requiring fast drying and
demould, more curing agent is needed; contrarily, if molds
requiring slower drying and demould, less curing agent is
needed.
(Note: our company does not recommend you to add silicone oil. If
a special soft liquid silicone mold or fine detailed and complex
patterns products are required, 5%**0% silica gel oil can be
added to soften the mold for easy demould.)
Molding Silicone Rubber
FAQ:
Why is the appearance of the
finished mold striate and unsmooth?
It is because the appearance of the product or the model itself
is not perfect, and it has not been polished before the further
operation. So when you make silicon molds, firstly you should
polish the products, spray the realese agent evenly on the
product. In this case, the problem can be avoided.
| 国家: |
China |
| 型号: |
HY620/625
|
| 离岸价格: |
7.28 ~ 8.38 / Kilogram （面議）
获取最新报价
|
| 位置: |
China |
| 最小订单价格: |
7.28 per Kilogram |
| 最小订单: |
200 Kilogram |
| 包装细节: |
25kg/drum, 200kg/drum |
| 交货时间: |
within 3 days after confirming your bank reciept |
| 供应能力: |
8 Ton per Day |
| 付款方式: |
Western Union, L/C, T/T |
| 產品組 : |
- |
