Sell Sandwich panels with aluminum foil facings making machinery /PU p

详情

Sandwich panels with aluminum foil facings making machinery /PU production line

INTRODUCTION
This production line is a kind of specialized equipment for producing laminated panels with the middle layer of anti-combustion polyurethane or polyisocyanurate or phenolic polyfoam and with aluminum foil as the top and bottom face layers. The laminated panel is between *0 and *0 mm in thickness, ***0mm in width, length determined by the customer. The panel is mainly used as the ventilation pipe for central air-conditioners. Different insulating panels with other soft facing layers could also be produced on the line.
The operation principle of this line is as follows: raw materials of rigid-foam plastic are delivered into the mixing head through the metering pump on the injection machine and then injected onto the bottom facing sheet going to conveyors along with the top superficial sheet. Between the upper and lower conveyors, the liquid materials are hardened into shape, after which the laminated sheet is edge-trimmed and, by an automatic tracking cutting mechanism, cut into segments according to the preset length.
The production line has already passed the hi-and neo-tech product identification carried out by the Economic and Trade Commission of Jiangsu Province and Jiangsu Science and Technology Department, being evaluated as one of the first-batch high and new products of Jiangsu Province

MAIN TECHNICAL PARAMETERS
Specification of produced panel***0 mm×***0 mm (Width×Thickness), Length on request
Linear speed of production *5 m/min
Maximum embossing speed*5 m/min
Agitating speed***0 r/min
Reciprocating times of injection head per minute*0
Maximum temperature of hot-air circulating*0
Laminating length of laminator*8 m
Maximum clearance between conveyors **0 mm
Total power (KVA) ****5
Overall external dimensions****0×***5×***6 mm (Length×Width×Height)
Eexternal dimensions of embossing machine unit ***0×***0×***0 mm (Length×Width×Height)