WE-6800 series multi-functional digital readout can be installed on milling machine, drilling machine and lather machine, which can supply the measuring location when used together with the linear scales. Specialities£º 1. Use our special 24-bit count chip£¬the reading speed can reach 60m per minute 2. Systematic anti-jamming in power and signal can reach 2200V or above 3. Display data English and Chinese 4. Can recall the current position after power failure 5. Can work right between AC 90V and 240V Functions � Plastic body � 999 sets of SDM coordinate � Zero setting � 1/2 calculation, locating work piece center � mm/inch conversion � INC/ABS conversion � Resolution selection: 0.0001, 0.0002, 0.0005, 0.001, 0.002, 0.005, 0.01, 0.02, 0.05 � Diameter/Radius selection � DIR: Setting the coordinate direction � Shrink function � ***** � Multiple machining functions: (1) Bolt Circle machining (2) R-angle (3) Divide holes on an oblique line (4) Machining on an oblique line � Setting and recalling a datum for machining � Error compensation: Linear compensation � Instant power failure memory � Power consumption: AC90V-245V Specification Voltage AC 90V ¡«240V Power The most is 15W Dimension 295X185X45(mm) Weight 1.45kg Linear scales signal Orthogonality TTL , frequencyless than 2MHz , current more than 1 mA