DC-3000 is appropriate to digital measuring system, the video measuring system, profile projector and tool microscope. with analysing and prosessing the 2D measurement data, the metrology DRO is widely used in the profile projectot, Tool microscope, Video measurement system and other two-dimension measuring instrument. Specialities 1. Systematic anti-jamming in power and signal can reach 2200V or above 2. Can recall the current position after power failure 3. Can work between AC100V and 240V Functions 1. Measure , preset and construct the graphic elements such as the point, line, Circle, angle distance, rectangle, thread and so on. 2. The functions of Axis-skew and Coordinate-shift are very convenient 3. Can connect the foot-switch and edge detector, so can quickly gather the data 4. Can print the program, graphic elements and 3-coordinate displaying data 5. The user can record the program and volume measure the same workpiece 6. Polarity and Cartesian, INC coordinate and ABS, MM and INCH 7. Linear and segmental linear error correction 8. Z-axis can be connected with linear scales or rotary encode 9. Store 100 permanent data and 10 temporary data Specification Voltage AC 90V-240V Power Less than 15W Input scales Signal Orthogonality TTL , frequency more than 2MHz , current less than less than 1mA Resolution(¦�m) 0.1¡¢0.2¡¢0.5¡¢1¡¢2.5¡¢10 Weight 1.49kg Dimension 295x185x68(mm)