详情
Features:
1, strong cohesive force, can be
well attached to the wall and coating
2, good anti-crack
function
3, good damp-proof function and
ventilation can keep the wall and the painting dry
4, texture of nature, ensure the
decorative paint effects can be completely reflected
Surface Treatment:
1, the substrate surface should
be firm, dry and clean, no grease, no wax, and other loose
materials.
2, new plaster surface should
maintenance about twelve days before inserting the lacquer putty,
do not use cement paste for calendaring.
3, if the wall is too dry, wet
the wall before operation till there is no obvious water on the
surface
Operation Process:
1, the ratio: damp-proof lacquer
putty: water: *5kg/bag + about 6.**7.0L water
2, pouring the water into the
stirring barrel, adding the powder slowly, stirring them into
particle paste with no powder no deposition
3, using inserting tools to
batch, after **6h of the first insert can make the second
time
4, polishing the lacquer putty
layer, control the thickness between 1.**1.5mm
5, after finishing the lacquer
putty layer 7 days can coat other paintings
6, nursing the lacquer putty
layer by water after it dries ****8h, keep this for **3
days.
Tips:
a, mixing the MB NO.7 with water
into paste, electric mixer can get better effect. put it aside for
a few minutes and then a little stirring to strengthen the
hardness.
b, using appropriate scraper to
scrap the lacquer putty on the surface
Technical
Reference:
|
Coverage
area(amount)
|
Technical reference
|
|
About 1.8~2.5kg/m2,
according to the smooth of the
surface
|
1, status: powder, evenly
without caking
|
|
2,operation: no scratching
barrier
|
|
3, dry time: under
4h
|
|
4, water resistance(*8h):
normal
|
|
5, alkaline resistance(*4h):
normal
|
|
6, shear strength under standard
pressure:＞1.2MPa
|
|
7, shear strength after water
resistance:＞0.9MPa
|
|
8, shear strength in
freeze-thaw:＞0.9MPa
|
Normal Amount:
about 1.8~2.5kg/m2, according to
the smooth of the surface
Cautions:
1, make sure the smooth and
vertical rate of the surface before operation
2, never mix the dry slurry with
water and use again
3, the mixed lacquer putty
should be used up within 3h
4, polishing within 1~2 days
according to the weather
5, for the base surface by
cement paste calendaring, suggesting the MB external repair lacquer
putty
6, just polish the marks, do not
over-polish so as to affects the strength
Store Method:
Store in cool and dry place,
unopened product can be saved for one year.
Packing:
2kg/bag, *5kg/bag
\\\\\
