详情
Features:
This product is a new type
painting (white color), suitable for the indoor wall general
treatment before leveling, with good bond strength and
damp-proofing function, environmental friendly, non-toxic,
anti-aging, abbey the N type standard of Chinese building industry
for indoor lacquer putty JG/********8
Surface Treatment:
The substrate surface should be
firm, dry and clean, no grease, no wax, and other loose materials.
New plaster surface should maintenance about twelve days before
inserting the lacquer putty, do not use cement paste for
calendaring. If the wall is too dry, wet the wall before operation
till there is no obvious water on the surface
Operation Process:
1, according to *7% percentage
of water pouring the water into mixed barrel, then add powder,
using an electric mixer to make particle paste, put it aside for a
few minutes and then a little stirring, then can be
used.
2, using spatula to scraping the
slurry onto the surface, suggesting two or three times, the second
time of scraping should after the first time done
3, when finishing the putty,
according to the weather to polish within 1~2 days, just polish the
marks, do not over-polish so as to affects the
strength
4, about 5~7 days later, the
surface can be operated, for earlier operation, suggesting
alkali-resistant primer
Normal Amount:
About 1.5~1.8kg/m2 under the
smooth surface
Cautions:
1, this product requiring
operating under 5℃~*0℃ situation, never operate under
raining.
2, never mix the dry slurry with
water and use again
Store Method:
Store in cool and dry place,
unopened product can be saved for one year.
Packing:
*0kg/bag, *5kg/bag
