看起來你不是TradeKey.com的會員。 立即註冊,與全球超過7百萬的進口商和出口商建立聯繫。 点击注册--免费! |
BOOK A CALL
Book Call On Your Favorite Time
Code
🗘

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

Contact Us
Sell Stone Adhesive

Sell Stone Adhesive

离岸价格

获取最新报价

|

Minimum Order

位置:

Changsha

最小订单价格:

-

最小订单:

-

包装细节:

-

交货时间:

-

供应能力:

-

付款方式:

-

现在联系
免费会员

联系人 cindy

Changsha, Hunan

现在联系

详情


Feature
The penetrate ability of the product is high and could be available into the inner structure of the stone, which could improve the strength, quality of the stones greatly. With strong adhesive power, resistant of aging, oil, water; Clear glue with small contractility, be usable to cure all kinds of colors of stone materials.

Scope of Application
Mainly used in all kinds of stone materials, concrete to fill and cure, especially for curing the crack, sand hole, loose, breakage of the stones. With perfect cure performance for yellow, red stone with big defective points.

Using Method
1.  Remove the oil, dust from the surface and keep clear, dry.
2.  Mix SK***5 by rate of A: B as 3: 1 thoroughly. Spread the glue into the crack slowly. Also can dip the glue into the crack.
3.  Fill the crack every few minutes by **3 times. Polish the glue after solidifying. If permission, heat the stone to ****0Centigrade firstly, then spread the glue and roast to speed up the solidifying.
4.  Spread 2 sides for thick stones. Also can press the 2 sides by vacuum to enhance the penetrating ability.
5.  For big cracks, add some mountain meal into the glue before spreading, which could improve the stone structure, reduce contractility.
6.  For broken stone, should flat and fix the two surfaces firstly, then use SK***5 to cure.

Warning
1.  It should be A: B=3: 1 and mixed evenly enough.
2.  Due to slowly solidifying, flat the surface separately before glue solidified, do not pile up. Spread mountain meal on the surface as lubricant after solidifying to avoid bonding of the stones.
3.  Polish the surface after solidifying enough.
4.  Do not spread the stone treatment additive, or non-epoxy glue onto the surface which may take chemical reaction with the stone epoxy and reduce the performance.
5.  Do not mix cap of the part A and B. Tighten the caps after usage. Do not swallow.
6.  Make a trial usage in advance to avoid mistake due to the different physical, chemical property of the stone.

Storage and Packing
1. With one year life time in cool, ventilated and dry condition. Can go on use if test valid after the validity period.
2. Non-inflammable, non-poisonous after solidifying.
3. Packing size: 4kg/set (*6kg/ctn) in plastic bottle.

Send a direct inquiry to this supplier

至:

cindy < Hunan Magic Power Industrial >

我想知道: