1. The product shall be diluted with ****0 times water
and then dosed into the waste water directly. After being mixed for
several minutes, it can be precipitated or air-floated to become
clear water.
2. The pH value of the waste water should be adjusted to ***0 for
better result.
3. When the colority and COD are relatively high, it can be used
with the help of polyaluminum chloride, but not mixed together. In
this way, the treatment cost can be lowered. Whether polyaluminum
chloride is used beforewards or afterwards depends on the
flocculation test and the treatment process.
1.multi-function effective
biocide and slime stripping
