详情
FST - A **0 laser range sensor
Parameters that
1, laser wavelength: **5 nm
2, distance measuring range: 1 ~ **0 meters;
3, control mode: electricity to work/button control/line of control;
4, repetition rate: **0 hz or higher;
5, data output, RS**5 RS**2 TTL level
6, ranging accuracy: + / - 5 cm
7, working voltage: 5 v / ***2 v
8, appearance size: *0 * *8 * *8 mm
9, waterproof rating: waterproof IP*7 dust (the default)
Can be soaked in 0.5 m water depth (special requirement)
*0, the working temperature: - *0 ° C ~ + *0 ° C
*1, baud rate: ****0 BPS data bits 8 stop bit 1 check digit
*2
1, red for positive, black for the ground wire
2, the half duplex communication, serial data output format: this module ByteH, ByteL, FF, *0 four bytes.
*0 to address bits. Such as *0.*0 m = 1 e, *2, FF, *0
3, the working current of about *0 ma.
Laser level grade I semiconductor laser ranging (harmless to the human eye)
Working humidity range humidity: 0% to **0%
Level of waterproof IP*7 waterproof dustproof
Electrical properties
Sensors have good resistance to lightning on electrical performance, can be in the thunderstorm days work.
Emc performance
Good antistatic discharge (level 4), radio frequency electromagnetic field radiation (level 3), the pulse magnetic field immunity (level 5), power frequency magnetic field interference performance (level 5), able to work under strong stability of the power frequency magnetic field.
Climate protection performance
Has excellent high and low temperature, alternating hot and humid performance, long-term stable job in the wild nature.
Mechanical properties of
Have good vibration, vertical vibration fatigue performance, transport properties, resistance to commonly used land, sea and air transport conditions and adapt to the transmission line field installation, the working conditions.
reliability
A) the average trouble-free continuous working time (MTBF) of not less than ****0 h.
B) the average data loss rate should be no greater than 1%.
