详情
Work
Principle:
In
the High Pressure pulverizer 's mainframe, ********0 KG high
pressure springs, are fastened on the roller hanger. After work
beginning, the rollers rotate around the spindle. And it rotates
closely to the grinding ring, driven by the high pressure spring
and centrifugal force. Its rotated pressure is 1.2 times over than
the counterparts of Raymond Mill, and therefore the production is
significantly increased. Crushed materials are brought into sizing
machine by cycling wind of fan. Entering cyclone powder collector,
the fine materials are collected and finished. Big size ones return
and crushing process is repeated. Cycling wind goes back to fan and
recirculation is made. Surplus wind is purified when enter bagtype
duster. While roller and ring made somewhat abrasion, length of
high pressure spring should be adjusted to ensure stable production
and fineness.
The
Six Key Features of High Pressure Pulverizer
1. Compared
with other pulverizers under the same power conditions, the output
of this machine is increased by ****0%. Under the performance of
high pressure springs, the rollers grinding pressure on raw
materials is raised by *******0kg.
2. All
the mineral materials with Mohs hardness below 9. 3 can be
crushed.
3. The
finished powder has a wide range of particle size from the maximum
particle diameter of 0. **3 mm (*0 mesh), to the finest diameter of
0. **3 mm (***0 mesh). While the normal particle diameter is around
0. **3 mm (**5 mesh).
4. Its
dust-removing effect exactly meets the National Dust Discharge
Standard.
5. The
classifier is easy for adjustment.
6. The
grinding unit adopts a superposition multi-grade sealing with good
sealing performance.
|
high pressure pulverizer technical
parameter
|
type
|
YGM***5
|
YGM***4
|
YGM***8
|
YGM***1
|
YGM***8
|
|
roller
|
Number(No.)
|
3
|
3
|
4
|
5
|
6
|
|
diameter(mm)
|
**0
|
**0
|
**0
|
**0
|
**0
|
|
height(mm)
|
**0
|
**0
|
**0
|
**0
|
**0
|
|
ring
|
Inner diameter(mm)
|
**0
|
**0
|
**0
|
***0
|
***0
|
|
height(mm)
|
**0
|
**0
|
**0
|
**0
|
**0
|
|
Max. Feeding Size (mm)
|
*5
|
*0
|
*5
|
*0
|
*5
|
|
Grain size of finished product (mm)
|
0.****0.**3
|
0.****0.**3
|
0.****0.**3
|
0.****0.**3
|
0.****0.**3
|
|
Motor power (KW)
|
*8.5
|
*2
|
*7
|
*5
|
**2
|
high pressure pulverizer ref.
output
|
Ｍｏｄｅｌ
|
ｆｉｎｉｓｈｅｄ ｐｒｏｄｕｃｔ ｆｉｎｅneｓｓ(ｍｍ)
|
|
0.**5
|
|
