详情
ICR*3 tester is used to control electromagnetic and piezoelectric
injectors used in the common rail injection systems. It is possible
to control up to four injectors of a type at a time. The signal
generated by the tester which controls the injectors, corresponds
to the signal which appears in the car engine controller.
Then, it automatically switches to the selection screen of the
controlled injector type. The name "electromagnetic" stands for the
electromagnetic injector, whereas "Piezoelectric" stands for the
piezoelectric injector.
After selecting the appropriate type of the injector, the screen
displays the currently set parameters of the injector control
signal.
After you start the injectors, the
tester performs a sequence of injections in the quantity indicated
by the parameter "Quantity".
Change
of the value of the simulated engine speed
The parameter "Speed" indicates the simulated value of rpm. This
value is the real value of the car's engine speed, so that the
injector injects half as many times. The range of changes of this
parameter ranges from *0 rpm to ***0 rpm.
Change of the value of the
simulated injection time
The parameter "time" defines the time of injection of the injector.
This parameter change ranges from 0.1ms to 5.0 ms. Changes can be
performed every 0.1 ms or every 1ms.
More details auto-testers.com
