Introduction: fiber-optic
video transceivers SWV****0 series can simultaneously transmit 8
channels of *-bit digitally encoded broadcast quality video/return
or bidirectional data/unidirectional or bidirectional
audio/Ethernet/Telephone/Dry contact over one multimode or
single-mode optical fiber. These multiplexers are typically used in
applications where the cameras have P/T/Z capabilities. Plug and
Play design ensures the ease of installation and operation.
Electronic and optical adjustments are never required. LED
indicators are provided for instantly monitoring system status.
Devices are available for either standalone or rack-mount
installation, which is suitable for different working
environment.
Features: 1.*-bit digitally
encoded and non-compression broadcast quality video
transmission
2.Directly compatible with NTSC, PAL, and SECAM CCTV camera systems
and support RS***2, RS***2, and RS***5 data protocols
3.Support any high-resolution video signal
4.Automatic compatible PAL, NTSC and SECAM video system
5.Power supply and other parameter state indication, which can
monitor the operation condition of system
6.Support no-damage regenerative trunk of video
7.Constant input optical power, and large dynamic range ,no
Electrical or Optical Adjustments Required
8.Special ASIC design
9.Industry-grade of operating temperature from **0°C to *5°C ,
which is applied to the different working environment
*0.Hot-swap function
*1.Stand-alone type or card-type installed in *9"4U rack-mount
chassis
Specifications:
Technical Specification
Video channels：8 channels
Video bandwidth：8 MHz
Automatic compatible video system：PAL, NTSC, SECAM
Video input/output impedance：*5 Ω(unbalance)
Video signal-to-noise ratio：≥*7dB
Differential gain：(*0%**0%APL) DG <1% ( typical value)
Differential phase：(*0%**0%APL) DP <0.7° ( typical value)
Video connector：BNC Fiber-optic Specification
F/O connector: FC/ST/SC
TX ：Power:**5 ~ *8dBm Sensitivity :≤**5dBm
RX：Power:**5 ~ *8dBm Sensitivity :≤**5dBm
Transmission Distance :*0KM (single mode)
Operating Wavelength: TX***0/RX***0nm (Transmitter);
TX***0/RX***0nm (Receiver)
Specification of custom-made options 1. Data
Connector: Terminal Blocks
Encoded type : RS**5 / RS**2 / RS**2 / Manchester
Data rate : 0 - **0Kbps
BER: ≤***9 2. Audio
Connector: Terminal Blocks
Audio input / output impedance :**0Ω(Balance/ unbalance)
Audio input / output voltage :2Vp-p ( typical value)
Audio input / output level :0dBm ( typical value)
Video bandwidth:*0HZ~*2KHZ
Audio digital encoded bandwidth :*4bit
Audio signal-to-noise ratio: S/N≥*5dB (weighted) 3. Telephone
Connector: RJ*1
Bandwidth :8KHZ
Features：Support call-showing function ;support H-F
Operating mode : Point to point hotline mode / FXS-FXO 4. Ethernet
Connector: RJ*5
Support mode : Half duplex or Full duplex
Standards：IEEE**2.3
Data rate : *0M / **0Mbps
Bandwidth: *5M Characteristic
Dimensions: *9.2(L)×*7.3(W)×2.8(H) cm
Operating Voltage: DC5V (we will offer external power supply from
AC*****0V to DC5V for each unit )
Operating Temperature: **0°C to **5°C
Storing Temperature: **5°C to **5°C
Humidity: 0 to *5% non-condensing
MTBF: ≥*0 5 hours Warranty: 5 years
Approvals: FCC,CE, RoHS approvals
