UM*1D is a high-tech ,small-sized ultrasonic thickness according to
ultrasonic measurement principle
with THRU-COAT to measure the net thickness of the base material
without having to remove the paint .
Besides all the shining features of UM*1 ,the UM*1D has the
following function:
1.Can measure the net thickness of testing material with THRU-COAT
.
2.Operating principle :
Standard mode: P-E (pulse-echo) method with dual-element
probe
THRU-COAT mode : E-E (echo-echo) method with dual-element
probe Standard
package: UM*1D thickness gauge Standard probe
Carrying case Two 1.5V AA alkaline batteries Couplant Operating
manual Certification of quality Packaging list Operating
principle:I-E
(interface-echo) mode with single-crystal delayed probeE-E (echo-echo) mode with
single-crystal delayed probe Measuring
range: 0.8mm to **0mm; 0.**1in to *1.*1in in
standard mode 3.0mm to *8.0mm; 0.**8in to 0.**9in in through
coating mode Depending on probe, material and surface condition Digital
resolution: 0.**1in or 0.1mm Units: Selectable:
inch or mm Display: **8 multiply
*4 dot-matrix LCD screen (1.*5in multiply 2.*4in; *2mm multiply
*7mm) EL backlight and switchable contract ratio Digit height:
0.*4in or *3.*5mm Measurement update
rate: 4 Hz in standard measurement mode *5 Hz in
MIN capture mode Material velocity
range: ***0 to ***9 m/s; 0.**9 to 0.**4 inch/us Power: Two 1.5V AA
alkaline batteries Warning with low battery voltage Operating
time: Up to **0 hours (without backlight) with
alkaline batteries, depending on operating mode Auto
shut-off: After 5 minutes of non-use Operating
temperature: **0 C degreed to **0 C degreed;
**4 F degreed to ***2 F degreed Specification to **0C degreed/*4 F
degreed on request Size: 5.*6in multiply
2.*7in multiply 1.*5in; **9mm multiply *3mm multiply *2mm (H
multiplyW multiply D) Weight: **0g; 7oz
(including batteries) Data logger
capacity: Up to **0 readings can be divided into a
maximum of 5 files (user-selectable) Optional accessories:
Attachable rubber case Numerous special probes on request Couplants
and high-temperature couplant *-step/*-step block for calibration
Data transmission cable Application software Operating
language: English and Chinese Application
software: UMVIEW Interfaces: Serial RS
**2C port in combination with a communicative cable; Data transfer
parameters: 8 bits, 1 stop bit, ***0 baud, no parity.
