UM*2 is a high-end ultrasonic thickness gauge with high resolution
and performance to do the test.
Besides all the features of UM*1,UM*2 has the following
functions:
1.0.*1mm resolution
2.Built-in 7 compensating lines
UM*2 Ultrasonic Thickness Gauge
Standard package:
UM*2 thickness gauge
Standard probe (PT**8)
Carrying case
Two 1.5V AA alkaline batteries
Couplant
Operating manual
Certification of quality
Packaging list
Operating principle: Ultrasonic pulse/echo method with dual-element
probes
Probe zero adjustment:
Selectable: *-point calibration: Normal
measurement
*-point calibration: Curve surface measurement or other special
application with a high precision
V-path correction: Automatic
Measuring range:
0.8mm to **0mm; 0.**1in to *1.*1in
Depending on probe, material and surface
condition
Digital resolution:
H<4in: 0.**1in /0.*1in or 0.*1mm/0.1mm
H≥ 4in: 0.*1in or 0.1mm
Units: Selectable: Inch or mm
Display:
**8× *4 DOT-matrix LCD screen (1.*5in× 2.*4in; *2mm×
*7mm)
EL backlight and switchable contract ratio
Digit height: 0.*4in or *3.*5mm
Measurement update rate:
4 Hz in standard measurement mode
*5 Hz in MIN capture mode
Material velocity range: ***0 to ***9 m/s; 0.**9 to 0.**4 inch/µ
S
Power:
Two 1.5V AA alkaline batteries
Warning with low battery voltage
Operating time: Up to **0 hours (without backlight) with alkaline
batteries, depending on operating mode
Auto shut-off: After 5 minutes of non-use
Operating temperature:
**0degree Centigrade to **0degree Centigrade; **4degrees Fahrenheit
to ***2degrees Fahrenheit
Specification to **0degree Centigrade/*4degrees Fahrenheit on
request
Data logger capacity: Up to **0 readings can be divided into a
maximum of 5 files (user-selectable)
Optional accessories:
Attachable rubber case
Numerous special probes on request
Couplants and high-temperature couplant
*-step/*-step block for calibration
Data transmission cable
Application software
Operating language:
English and Chinese
Measuring error:
Up to 1in: ± 0.**2in or ± 0.*5mm
Above 1in: ± 0.5%H
H is the height of the testing object
Repeatability: ± 0.**1in or ± 0.**5mm
Application software: UMVIEW
Interfaces:
Serial RS **2C port in combination with a communicative
cable;
Data transfer parameters: 8 bits, 1 stop bit, ***0 baud, no
parity.
