HDMI 100m Extender single over cat6e/7 support HDMI1.3b HDCP1.2

详情

The YT-TXRX**0M Extender use one cat*6 cables up to **0 meters instead of HDMI cable to transmit high definition signal, for cutting down cost. Long distance transmission of high definition signal is very difficult because HDMI cable is very expensive. The Extender is designed to supply for long distance transmission of high definition signal.

FEATURES:

1. Support HDMI 1.3 protocol 

2. HDCP 1.2 protocol compliant

3. Support video input : *4/*0/*0fs/***0p/***0i/**0p/**6p/**6i/**0p/**0i

4. Signal transmission: Single cat*6 cable up to**0 meters is connected between TX and RX of the Extender. The HDMI cable length between the source and the TX or the Sink and the RX will be up to **5m. The cat cable length and the HDMI cable length add most up to **0m.                            

5.Support video output : *4/*0/*0fs/***0p/***0i/**0p/**6p/**6i/**0p/**0i

6. Audio format support : DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD

7. LED indication: when power is supplied or device is working, LED related with will go bright.

8. Support up to*0metres AWG*6 cable length between extender and source & sink device

9.No loss of quality

*0.Installs in minutes

*1.Need DC5V/2A power supply

Operating and Connecting:

1. Connect one HDMI 1.3 cable up to *0meters between source device and TX Extender

2. Connect one HDMI 1.3 cable up to *0meters between sink device and RX Extender

3. Connect one cat*6 cables up to **0 meters  between TX and RX Extender

4. Connect 5V power supply to the YT-TXRX**0M-CAT6 Extender

SPECIFICATIONS:          YT-TXRX**0M-CAT6

Length of CAT*6 cable between Rx and TX…......…. ..….Up to **0 meters

HDMI Input…...........…...…*4/*0/*0fs/***0p/***0i/**0p/**6p/**6i/**0p/**0i

Support audio format input............…DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD

HDMI Output…..….….............…*4/*0/*0fs/***0p/***0i/**0p/**6p/**6i/**0p/**0i

Support audio format output.............DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD

Max bandwidth.......…**5MHz

Max baud rate........….…4.*5Gbps

Input Video signal …........ 0.5~1.5Volts p-p

Output DDC signal ….....… 5Volts p-p (TT1L)

Input/Output HDMI1.3 cable distance............≤*5m AWG*6 HDMI 1.3 standard cable

Max working current.......…...**0mA

Power adapter format…...…............Input:AC (*0HZ, *0HZ) **0V***0V; Output: DC5V/2A

Operating Temperature range.........….… (**5 to **5℃)

Operating Humidity range….….............5 to *0%RH (No Condensation)

Dimension (L x W x H)..................................*9**3**7(mm) (RX/TX)

Weight…...........…..…0.*3kg/pcs *2

 Our devices offers solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.
 

Notes:

Please use the machine as the instruction listed to keep the long use lifetime of the machine.

1.The machine should be placed at the spot far from the Damp, High-Temperature, Dusty, Erosive, and oxidative environment.

2.All parts will be free from the strong shake, hit, fall.

3.Touching the power adaptor with the wet hands is prohibited.

4.Please hold the power adaptor head and do not pull the power cord when cut off from the socket.

5.Please turn the power off when the device is not used for long time.

6.Please do not open the cover and do not touch the inside parts.

7.Please use the original factory power adapter.

Before power on,Please check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below: