This purification tower adapts to many equipments which are used
for disposaling of unhealthy waste gas.
It's not only widely used, but also high efficiency of
purification( more than *5%).
Its equipment resistance is low (******0pa), cost of operation is
low.
Application:
Acid gas: sulfuric acid, HLC, nitric acid, HF etc.
Alkali gas: NAOH, KOH, NHS etc.
Organic gas: benzenes, alcohols, phenols.
We used different absorption solvent for dealing with different
harmful gas.
Construction and working theory:
1.Purification tower consists of tower body, solvent tank, praying
system, packing, separator of gas and solvent.
2.According to different mediums, purification tower could made of
PVC, PP, FRP, carbon steel or stainless steel.
3.Off-gas is input to the tower body from the bottom inlet, then
passed through the filling layer and spray mist
system.
4.Off-gas is fluid purified, purified gas pass through the
gas-solvent separator, is output to atmosphere.
5.Mist spray system takes American HHSJ spray-head, with good
nebulization, obvious purification effect.
Attention:
1. This purification tower should be installed on anti corrosion
basis which is higher **0mm than ground. Pump with acid resistance
should be on another anti corrosion basis.
2. This equipment should be installed indoor, in order to prevent
cold weather from effecting on equipment and absorption
solvent.
3. If there is no PH controlling system, PH of acid or alkali
solvent should be checked regularly, and consistency should be
adjusted at any time.
4. Spray-head and filling material should be checked regularly, in
order to avoid plugging, any problems should be solved
immediately.
