详情
Engine
Units:
US
Metric
Net Power **6.0 kW
Operating Specifications
Operating Weight *****8.0 kg
Bucket Range *2.***3.7 m3 (*6.***1.0 yd3)
Cat Truck Match - High Lift **7, **5
Cat Truck Match - Standard Lift **7
Operating Weight - Tier 2 Equivalent* *****8.0
kg
Operating Weight - Tier 4 Final* *****8.0 kg
Operating Weight* *****8.0 kg
Rated Payload - High Lift *4.9 t
Rated Payload - Standard Lift *7.2 t
Note * High lift, *0/****1 BFOR (*******8),
standard cooling, *3.8 m3 (*8.0 yd3) bucket (*******2).
Articulation Angle *3.0 °
Transmission
Transmission Type Cat Planetary Power Shift
Forward - 1 6.8 km/h
Forward - 2 *1.9 km/h
Forward - 3 *0.5 km/h
Reverse - 1 7.5 km/h
Reverse - 2 *3.1 km/h
Reverse - 3 *2.5 km/h
Direct Drive - Forward 1 Lock-up disabled
Direct Drive - Forward 2 *3.0 km/h
Direct Drive - Forward 3 *2.8 km/h
Direct Drive - Reverse 1 8.0 km/h
Direct Drive - Reverse 2 *4.2 km/h
Direct Drive - Reverse 3 *5.2 km/h
Note *0/****1 BFOR (*******8), calculated
speeds.
Hydraulic System - Lift/Tilt
Cylinders - Lift/Tilt Double-acting
Lift Cylinder - Bore **7.0 mm
Lift Cylinder - Stroke ***2.0 mm
Lift/Tilt System - Circuit Positive Flow
Control
Lift/Tilt System - Pump Variable Piston
Maximum Flow at 1,**0 rpm ***0.0 l/min
Relief Valve Setting - Lift/Tilt ****0.0 kPa
Tilt Cylinder - Bore **5.0 mm
Tilt Cylinder - Stroke ***0.0 mm
Note High Lift configuration.
Hydraulic Cycle Times
Dump 1.8 s
Lower 3.8 s
Lower Float Down 3.1 s
Rack Back 2.4 s
Raise 9.2 s
Total Hydraulic Cycle Time *7.2 s
Note High Lift configuration, calculated
speeds.
Service Refill Capacities
Fuel Tank ***0.0 l
Cooling System **3.5 l
Crankcase **0.0 l
Transmission **6.9 l
Hydraulic System - Tank Only **3.0 l
Differential - Final Drives - Front **2.0 l
Differential - Final Drives - Rear **2.0 l
Hydraulic System Factory Fill **3.0 l
Note High Lift configuration.
Buckets
Bucket Capacities *2.***3.7 m3 (*6.***1.0
yd3)
Axles
Front Fixed
Rear Trunnion
Oscillation Angle *0 degrees
Hydraulic System - Steering
Maximum Flow at 1,**5 rpm (***0 kPa/1,**0 psi)
**5.0 l/min
Relief Valve Setting - Steering ****0.0 kPa
Steering System - Circuit Closed
Steering System - Pump Piston, variable
displacement
Total Steering Angle *6.0 °
Engine - Tier 4 Final
Bore **5.0 mm
Displacement *2.1 l
Emissions U.S. EPA Tier 4 Final
Engine Model Cat® C*2 with ACERT™ Technology
Gross Power - SAE J***5 **5.0 kW
Net Power - EEC *0/***9 **6.0 kW
Net Power - ISO ****6 **4.0 kW
Net Power - ISO ***9 **6.0 kW
Net Power - SAE J***9 **9.0 kW
Peak Torque - 1,**0 rpm ***0.0 N·m
Rated Speed ***0.0 r/min
Stroke **2.0 mm
Torque Rise *3%
Note Standard ambient cooling.
Engine - Tier 2 Equivalent
Bore **5.0 mm
Displacement *2.1 l
Emissions U.S. EPA Tier 2 Equivalent
Engine Model Cat C*2 with ACERT Technology
Gross Power - SAE J***5 **7.0 kW
Net Power - EEC *0/***9 **6.0 kW
Net Power - ISO ****6 **4.0 kW
Net Power - ISO ***9 **6.0 kW
Net Power - SAE J***9 **9.0 kW
Peak Torque - 1,**0 rpm ***0.0 N·m
Rated Speed ***0.0 r/min
Stroke **2.0 mm
Torque Rise *3%
Note Standard ambient cooling.
