TI ARM Cortex-M3 LM3S8962 Development Board

详情

Specification Processor : TI's Cortex-M3 microcontroller in ***-pin LQFP package Program Flash : **6 KB Data Memory : *4 KB Dimensions : **1 x *5 mm Power : *5V powering Debug Connector : *0 pin JTAG Hardware *0/**0 Ethernet Port 1 CAN Interfaces 2 Serial Ports SD Card Interface Analog Voltage Control for ADC Input 5 push- 1 LED Code Network Routine Http Server : It shows you how to use the Web Server CGI interface. HTTP Upload : You can upload files to SD Card from a Web browser. Telnet Server : Build a simple IP based command line interface. SMTP Client : It can send a dynamic email to an email address. DNS resolve : It can resolve an IP address of a Host from the Host name. uip Http Server : It's an Open source, you can visit a simple Web Server. Ethernet with lwIP : It demonstrates the operation of the TI's Ethernet controller using the lwIP TCP/IP Stack. IEEE ***8(PTPD) : The IEEE ***8 (PTP) software has been enabled in this code to synchronize the internal clock to a network master clock source. CAN Routine CAN example : CAN controller send incrementing value in first byte in CAN message every 1 second. SD Card Routine SD_FILE program : You can create, read, copy, delete files from the SD Card and format the card. Other small Routing Supply by TI such as gpio_jtag, blinky, timers, sd_card, interrupts, uart_echo, ***** What is included in the Kit One LM3S***2 Development Board One Serial cable One Netware cable One CD with Evaluation Software from Keil, total Routine. Notes: LM3S***2 don't has ISP function, it need to use the ULINK or JLINK to download program to the board.