Looking for sellers of fiber optic cable manufacturers Quotations

RFQ Details

The cable to be supplied must be compatible and suitable for deployment under a duct and in the ground or direct burial. It must be shielded by corrugated steel tape and provide complete protection against rodents. It must be ITU-T G652D compatible.

This shielding, covered by a black HDPE outer sheath, is to be placed over glass wicks. The cable must contain 24 x 250 μm single-mode fibers divided into 4 x 6-fiber tubes. The tubes should be different colors. The optical fibers contained in a tube must also be of different colors. The colouring of tubes and fibres must follow a standard colour code. The cable must be delivered by 06 kilometer drums with a regular, visible and indelible marking of the technical characteristics on the outer sheath. The cable must be sealed with gel in the tubes and with waterproof glass wicks.
The cable must support the joining of the fibers by the fusion splicing method.

Minimum Cable Build-up
1. 04 flexible tubes each containing 6 single-mode optical fibers with a diameter of 250 μm each
2. Gel between the fibers and the tubes containing the fibers
3. Flexible tube encompassing the 4 tubes
4. Reinforced waterproof glass wick\\\'s
5. Corrugated steel ribbon armor
6. UV-resistant HDPE outer sheath
Technical characteristics of the cable
The values of the technical characteristics of the cable below must be entered:
Dimensional Characteristics
Nominal Outer Diameter (mm) ................................. mm
Approximate Mass .................................................... kg/km
Mechanical Characteristics
Maximum pulling force (IEC ***2E1) ................. N
Maximum Operating Pulling Force ................................ N
Mechanical impact resistance ..................................... Nm
Crush Strength (IEC 7941E3) ................................... N/cm
Usage Characteristics
Minimum