.High resistance High tearing resistance No deformation White rtv-2 liquid silicone

详情

DINGHAO® silicone rubber are famous trademark in china from ***7.

type:DH-R******0

Use for:

Artificial culture stone molds, plaster mould, and so on.

Method of use:

First after the stirring of the whole barrel, remove the amount of A, B component. Then AB by **0:1 (parts by weight), the ratio of two mixed.

After vacuum exhaust bubbles will be able to produce a mold (they had to be the mother die smooth). For *4 hours at room temperature can

be used.

This product is non-toxic, nonhazardous goods transport. This product is stored in a cool, dry environment 9 months. More than storage can

still be used after passing the analysis.

Note: This product is placed a long time there will be little precipitation.

Product Description

1. Description ofmolding silicone rubber long life time rtv liquid silicone for mold making

DINGHAO® liquid silicone is tin cure silicone rubber for mold making. The rtv silicone rubber will be cured under room temperature. It's two components, the

mixing ratio is **0:1. Part A is a flowable liquid silicone rubber, Part B is the catalyst. It has an exceptional fluidity and good operability.

2. Characteristics of molding silicone rubber long life time rtv liquid silicone for mold making

*An exceptional fluidity and good operability, easy to demold
*Good tensile strength and tear strength
*soft hardness
*copy detailed pattern
*good flexibility

*eco-friendly

*long shelf-time &lifetime

3. Application of molding silicone rubber long life time rtv liquid silicone for mold making

DINGHAO® rtv liquid silicone is perfect molding material, it is suitable to make mold for concrete casting, artificial stone, brick, cement casting, gypsum decorations,

plastic product, resin craft, polyester, polyurethane, bronze casting, statues, jewelry, wax, crystal, tire mold, shoe mold, clay casting, ceramic casting. etc.

DINGHAO® rtv liquid silicone is mainly suitable for small or middle sized products with delicate pattern by pouring and brushing operation.

4. Datesheet of molding silicone rubber long life time rtv liquid silicone for mold making

5. Using instructions ofmolding silicone rubber long life time rtv liquid silicone for mold making

Step 1: prepare and clean the prototype.

You must make sure your original molds perfect. fix the original mold on a board , then using some assistant material(like cardpaper) to make a frame for to surround

the prototype. The frame is no need ,if we make the mold by brushing way .

Step 2: Take the silicone and catalyst as the ratio **0:1(silicone:catalyst=**0:1) ,mix the silicone rubber and catalyst evenly.
*Notes: Molding silicon rubber is a kind of flowing liquid and it contains two parts. Part A is a kind of flowing liquid and part B is the curing agent. Remember to mix

part A and part B evenly, otherwise the silicon rubber will be partly solidified and this will bring troubles for your final operation. What`s more, the finished molds will

have a short life. All of these will cause a waste of silicon rubber.

Step 3: Vacuum pumping

After mixed the silicone evenly, it is better to release the bubble by Vacuum pumping.

Step 4: Pouring cast or brushing cast

After released the bubble, we can pour/brush the silicone rubber on the prototype
*Notes:Please finished all the steped within the operation time .If not it will cause cross linking reaction, and no more further steps will be available.So,we have to pay

attention to the pot life and curing time.

PS:

Order get to 2T,Sincerely invite you as a general agent in your country,And you will get low price.

FACTORY INFORMATION:

From ***2, HCW GROUP is represented by 8 selfowned  stores and 5 factorys in  china,.  Our products including DINGHAO® Silicone RubberDINGHAO® Silicone Mold

and  HCW® ARTIFICIAL STONE, which exports more than *0 conutries over the world.. Even more, We can help you set up aartificial stone for you,Of cause,It  need

you buy our products more than enough quantity.

We have a cedar plantations over **0 hectares of cultivated area, Hospitality Tourism and we have a Chinese toon manufacturing factory,product: Frozen Toona sinensis,

Pickled Chinese toon,Chinese toon tree seeds,and so on.

    Welcome OEM order with customer brand name on the box and products, so if you want to order our models by OEM way, we can discuss it together.

    We have abundant exporting experience, espeically in EU market and South America market, so we can provide our customers with professional question reply and

after-serivce support.such as resin products,flowerpot,GRC products,door mold or windows moulds,and so on

    If you have further inquiry, please feel free to contact us.

Delivery Terms:  

This product we offer sea shipping only forwarder service pending your agreement to pay the cost.  Standard delivery time reference:

Southeast Asia: ****0 days

West Asia and North Asia: ****5 days

Middle East: ****0 days

US: ****0 days

UK/AU: ****0 days

Canada: ****0 days

Belgium /France/Germany/Sweden: ****0 days

Russia: ****5 days

Rest of Europe: ****5 days

Central & South America: ****0 days

Africa: ****5 day

 Attention:

a)       Free returns within *5 days upon receipt.  But please kindly be responsible for the shipping fees to return.

b)       There may be minor color difference between actual painting and view on the monitors due to the monitor setting.   Please be careful before bidding.

DINGHAO® silicone rubber &curing agent are all liquid,and it is very Heavy,in order to save your money, so cant

shipping by Express or air transport.