0.25-32 ton Wire Rope Electric Hoist for Construction

详情

Brief Introduction of ​Wire Rope Electric Hoist for Construction

1.CD / MD Universal wire rope hoist is a small light lifting equipment, can be used alone or in combinationwith single beam,which can be installed in single beam hoist bridge cranes,gantry cranes,cantilever cranes, modified,also for winch use.Therefore, it is one of the commonly used lifting equipment in factories,mines,ports,warehouses, garages, shops, etc. is to improve labor efficiency, improve the working conditions 

necessary machinery.

2. CD type electric hoist has only one normal lifting speed, which can meet the general requirements; MD type electric hoist has two lifting speeds: normal speed and slow work, can meet the fine handling, sand box, maintenance of machine tools and other fine jobs, MDtype electric hoist used more widely than CD type electric hoist.

3. CD type wire rope electric hoist including fixed type and running type, fixed type often supporting the use with electric hoist double girder bridge crane.Running type electric hoist can make linear reciprocating motion in the horizontal direction and also can make curvilinear motion in a limited arc orbit.Running type electric hoist often supporting the use with Single girder bridge crane,Electric suspension crane, Electric hoist gantry crane, Electric hoist semi-gantry crane and others, constituting a variety of hoist cranes.

Technical Parameter of ​Wire Rope Electric Hoist for Construction
Lifting capacity:0.*5ton/1ton/2ton/3ton/5ton/*0ton/*6ton/*0ton/*2ton
Hoisting height:9m/*2m/*6m/*8m/*0m/*4m/*2m/*6m/*2m/*8m
Hoisting speed:8m/min
Travelling hoist:*0/*0m/min
Working system:intermediate FC=*5%
Power supply:Three-phase AC **0V *0Hz or as your demand

Hoist spare parts of ​Wire Rope Electric Hoist for Construction
1. Hoisting guide    
The hoisting motor with large *- force is employed to comply with the frequent direct traveling duringcourse of working discontinuously.CD wire rope electric hoist is equipped with ZD style single speed motor.
2. Electrical equipment
The electrical mechanism consists of electric control box. limiter, switch, connecting wire etc.
According to the marked direction on the switch, press the correctly and control the hoistthrough the on-and-off of the relay in the control box. The operating voltage is ususlly *6V.
3. Rope guide
Standard rope guide is made of Q**5b steel.
4. Wire rope
Adopts high strength wire rope with tensile strength of ***0 Mpa, with good safety performance and long lifetime.
5. Reducer
The gear and axes are made of alloy steel or qualified carbon-steel. All reducers adopt *-level bevel gear.
proper heat treatment is conducted to ensure their reliability and service life. Finally, the box-body and box-cover are made of cast-iron. Both are well shake-reducing and sealed tightly.
6. Roller
The roller is made of high-quality seamless pipes and transmits power through spine. Its case is made of welded steel plate. This is the core part of the hoist.

Application of ​Wire Rope Electric Hoist for Construction
Mainly used for upgrading, migration, handling heavy loads, tanks flip chip bonding, such as installation and removal of various medium-sized concrete, steel, and machinery and equipment for construction and installation company, civil construction and bridge construction of factories and mines , electric power, shipbuilding, automobile manufacturing, construction, highways, bridges, metallurgical, mining, slope tunnels, wells and other infrastructure construction management protection of mechanical equipment.

Package
Electric hoist and electric parts will be packed by plywood crate, for avoiding the damage from goods crash and impact during the delivery.

Delivery
With 7 days after receiving the deposit

FAQ

As this kind of crane is customized, in order to offer you most suitable design and best solution. 

Please confirm following information when you send inquiry. 

1. The lifting capacity __ ton?

2. The lifting height is __m? (Lifting height=Distance from hook to ground)

3. What is the lifting speed? (Single speed or double speed)

4. What control mode do you need? (Pendant control or remote control or cabin)

5. What is the power supply in your country? (Our standard power supply is **0V,3Ph,*0Hz)

6. Is there any other special requirements?

7. Would be better if you have drawings of your plant.

If you have any inquiry, please feel free to contact with us by e-mail or by phone!