This product is used to detect new coronavirus (2019-nCoV)
IgM/IgG antibodies in human serum, plasma or whole blood
Used as a supplementary test indicator for suspected cases of
new coronavirus nucleic acid test negative or used in
conjunction with nucleic acid testing in the diagnosis of
suspected cases
Inspection Steps
1. Preparation before experiment
Take out the reagent kit and sample to be tested, and return
all reagents and samples to room temperature.
2. Experimental Steps
① Open the test reagent package, take out the test card
and lay it flat.
② Add 10μL samples to the sample hole of the test card. Then
add 2 drops (about 60μL) Sample buffer.
③ Reaction at room temperature for 10-15 minutes to observe
the results, the results displayed after 20 minutes are
invalid.
④ Concise operating procedures
Open the package, take out the test paper, and place it
horizontally
↓
Add 10μL of the sample to the sample hole of the test strip
↓
Add 2 drops (about 60μL) of sample buffer to the sample hole
↓React at room temperature for 10-15 minutes
Read the results with the naked eye
Detailed explanation of test results
Negative,Positive,Invalid
Diagram of the test results :
① Invalid result: there is no visible red line or only the
test line (T line) but no quality control line (C line),
the test is invalid and the experiment should be repeated.
② Negative result: a red quality control line (line C),
indicating that there is no antibody in the sample or the
antibody is below the detection level.
③ Positive result: two red lines (one red quality control
line and one of the red test lines) or three red lines (one
red quality control line and two red test lines).
