China
联系人 Ms. Sueky
Jiong dong industrial zone,cencun,tianhe, Guangzhou, Guangdong
The Duplicator
Four is our first dedicated 1.*5 mm filament extruder. This
extruder was designed from scratch, and contains a number of
custom manufactured parts. Weve learned a lot over our past
extruder designs, and incorporated a lot of those lessons here:
thats why its smaller, lighter, and faster to build. And since
its designed from the ground up for 1.*5 mm filament, its
light-years ahead of past designs in small-filament
reliability.
The layer
alignment is much better which results in nicer prints and higher
resolution, **0 micron inch.
Weve
completely overhauled the drive system to give the optimum
positioning accuracy. The entire system has been upgraded to
sturdy 3/8″ diameter linear shafting. This is probably overkill,
but you can trust that the axes will be sturdy. Weve also
switched to self-aligning, sintered stainless steel bearings.
These are very forgiving to DIY assembly and provide a nice,
smooth motion on the steel shafts. Weve completely replaced the Z
axis with a stepper driven, cantilevered stage. Guided by two of
the linear shafts, this completely eliminates any Z wobble and
results in nicely aligned layers. Using a high-angle lead screw,
we were able to increase the speed of the Z axis from
**0mm/minute to 1,**0mm/minute. This means the layer changes are
almost completely imperceptible.
Connect over
USB and hit print — the machine will calibrate itself and start
printing.
The new
electronics have been designed to make the printing experience
easier than ever. The Duplicator one connects to your computer
via a standard USB cable thanks to a USB chip on the motherboard.
Weve also added full end stop support so that you never need to
touch the XYZ axes ever again. When you hit print, the machine
will automatically home itself, heat up, and begin printing. All
you have to do is sit back and relax while your Duplicator Four
does all the work. Living in the future is awesome. Oh yeah, and
the electronics are all inside, so you dont have wires dangling
everywhere.
Or you can
print with SD card.Awesome, all your printer job can be done by
this small card. 2G card is sufficient for any 3D file and keep
as many file as you like. Simple and fast is our
mission.
|
Specification |
|
|
Interface |
SD or USB Link |
|
Max Printing Object Size |
**5***5***0mm |
|
Circuit |
5th generation,max support 5 motor |
|
X,Y Axis Positioning Resolution |
0.*2mm |
|
X,Y axis max speed |
***0mm/minute |
|
Z axis positioning resolution |
0.**5mm |
|
Z axis max speed |
***0mm/minute |
|
Dimension |
|
|
Product dimension |
**0 x **6 x **2 mm | *2.6 x *8.4 x *5 in |
|
Packing dimension |
**0***0***0mm |
|
Material Support |
ABS and PLA |
|
Material Size |
1.*5mm wire |
|
Material size requirement |
1.*5**0.1mm |
|
Temperature Sensor |
thermocouple temperature sensors |
|
Printing Object Specification |
|
|
Position resolution |
0.1mm |
|
Layer |
0.1mm *0.4mm |
|
Vertical Printing Speed |
*5Cubic Centi-Meter/ Hour |
|
Object Size |
**5 x **5 x **0 mm | 8.9 x 5.7 x 5.9 in |
|
LCD displayer |
Optional |
|
Filament |
|
|
Material Type |
ABS, PLA |
|
Color |
over *3 colors for choice |
|
Filament size |
1.*5mm |
|
1 Roll Filament weight |
1kg |
|
Components Specification |
|
|
Print Head |
1 pc /2 pcs |
|
Max temperature |
**0°C(**0°F) |
|
Printer Dimension |
**0 x **6 x **2 mm |
|
Printer Weight |
*2KG |
|
Electric Power Supply |
**0V / **0V ( Universal power supply, take IEC cable) |
|
Output |
**0W |
|
Software Format |
STL, G code |
|
Operation System |
Windows 7, Vista, Linux, Mac, XP, |
|
Compliance |
GB, CE |
|
Software |
Replicator G( Both English and Chinese Edition) |
| 国家: | China |
| 型号: | 3D2 |
| 离岸价格: | 获取最新报价 |
| 位置: | - |
| 最小订单价格: | - |
| 最小订单: | 1 Piece |
| 包装细节: | Sea, Air, Express |
| 交货时间: | 7 Days |
| 供应能力: | 1000 Piece per Month |
| 付款方式: | T/T, Western Union |
| 產品組 : | - |
