500M remote controlled with 24 cues battery Fireworks Firing System+ with sequential fire(DBR01-X4/24)

详情

Specifications  

The product is special for stage fireworks, cake fireworks and other fireworks display.

One set DBR**-X4/*4 including one transmitter and 6pcs receivers. Each receiver with 4 channels.

Product Characteristic

1. Recivers - with antenna, the reciving signal mor stable.

2. Firing capacity - each channel could fire **6pcs display igniters and 1pcs safety igniter.

3. With TEST function. The LED will turns Green when the products are connecting well.

4. Replaceable & Programmable  -  the broken receiver can be replaced by the other receiver of the same series, there's no need to buy a new transmitter,  you could use change the channels as you want.

5.Each channel could fire one talon(consumer) igniters and 5 e-matches in series.

6. With launching lamp. It could light when the transmitter is launching successfully. with launching lamp. It could light when the transmitter is launching successfully.

7. It could divide into **0 districts (control **0pcs 4 channels receivers at most). Please notice the district in the middle of the transmitter. When you adjust it to 1, it will control the first *2 channels of receivers. When you adjust it to 2, it will run the second *2 channels. You could use the transmitter to control the other districts by the same manner.

8. The salvo fire and sequential fire function. 

If you want to fire some receivers sequentially. Please adjust table to *1,then press Rapid ,it will fire one by one automatically with 0.4 seconds interval. (The interval time is changeable; the technician could adjust for you.)

Brief instruction:  Please see the picture, there are *8 channels(*2pcs receivers) in total, which is divided into 4 districts: No 1 , No 2,No 3 and No4.  Once you press botton"1" on transmitter,  channel "1" of the 4 districts will fire together . If you press 2, also 4 channels will fire.  You could fire the last with the same manner.

Relevant Parameter

1. Remote distance - **0 M

2.Transmitting frequency - **3MHz

3.Battery specification of transmitter - power by 6 AA batteries,  with low battery indicator.

4.Transmitter power source - *2v *3A battery.

5.Battery specification of receivers - power by 4 AA batteries per receiver  

Attention

1.Please connect the products in series.

2.Please do not shake incept box violently, when no need use it.

3.Notice to prevent defile incept box when it's close to fireworks.

4.Please take the cell out when no use products for prevent defile incept box.

5.Please don't place the product in the damp, sour, alkali and pollution environment.

New receivers

new function, 

1, Programm, you just need to programm one hole, all the 4 cues will programm, you dont have to prgoramm one by one, more convient.

2,With low power indicator light, when the voltage is less than 5V, the light will flash.