联系人 aisy
Zhengzhou, Henan
6 yy - **0 type automatic fast hydraulic oil press, is on the basis of the introduction of similar foreign products improved design. Easy to use, easy operation, high yield efficiency, it is
suitable for press sesame seeds, peanuts, walnuts, almonds, pine
seed, tea seed and such as professional equipment of oil
crops
Put the material after heating into the machine , and get the oil
after pressing, simple and quick, the oil is natural and
virgin, customer can watch the produce process which need just a
few
minutes , Suitable for sesame, peanut, walnut, almond .
Machine main parts and use characteristics:
1. The machine main parts are gearbox, hydraulic cylinder,
piston, pillar, activity on the top and the base, cylinder,
distribution box, pressure gauge and automatic temperature
control device ,
the machine adopts *5 # steel and *7 SiMn steel forging pieces
which is high quality metal materials, make life of the
machine longer and quality better .
2. Hydraulic transmission components
Main hydraulic components are transmission and worm, turbine,
crankshaft, high-pressure pump, gear pump, check valve, hydraulic
cylinder, hydraulic pipe and other . Our company also combined
with
the internal and external advanced technology and produce the three plunger hydraulic pump station, high efficiency, stable and larger pressure, high oil yield , temperature resistant, can work
continuously, won the new and old customer??s consistent
high praise after put it in the market.
3. Hydraulic double cylinder with characteristics of main
components
Cylinder is made of hydraulic cylinder, piston, cylinder gland,
hex socket screw, oil seal (imported polyurethane material, high
pressure resistance, high temperature resistance, abrasion
resistance, can be use for a long time). The characteristics of the hydraulic double cylinder is : to rely on oil pump oil into the oil cylinder makes the piston force rapidly rising, falling fast,
short time, high efficiency, high degree of automation, without worry about the problem such as cylinder can not fall, without worry about the common problems that appear at other same products
from China other factories , such as : the cylinder cannot fall because of the pressing oil is too thick (especially in winter ) , oil seal aging, need man use hammer, plate bar press cylinder
down , hydraulic oil need to be changed many times in one year. Waste time ,energy and labour , even make the machine does not work normally. Our company developed hydraulic double cylinder is easy
operation, fast, time saving, high efficiency.
Electric control is combined by the voltmeter, micro point
temperature controller, electric contact pressure gauge,
contactor, relay, infrared heating tube, click device and so
on.
Third, announcement before starting up and operation method:
1, Clean the oil box, and add enough *6 #, *8 # hydraulic oil
into machine.
2. Check the bolt of each part is loose or not.
3, Check circuit wiring is correct or not , and turn on the
ground wire .
4, Turning on the power supply, open automatic temperature
control switch ,make the temperature to *0 degrees or so,place
mat on orifice plate above inside the cylinder , Then put cooked
oil
material into cylinder, fill it and put another mat, place material separate plate on, close the lid , start squeezing, put the reversing valve into rising position, about 6 to *0 minutes,
production complete.
5, When gauge pressure red needle point to *0 million mpa, the
electric control system automatic stop , and it automatic start
when a small amount of oil seepage from the cylinder and pressure
gauge pointer down to *6 million , pressure rise, cylinder
without oil leakage, oil has been out of the net, then
unloading.
6, unloading, hold the reversing valve handle place it to down
position slowly , make the material barrel fell to a distance of
about **0 mm away from the top lid, place the reversing valve in
the
middle room, open top lid and pick cake.
7, Place the reversing valve to rising position
And material cake rise , take on every plate and cushion, remove
the material cake .
8, then placed the reversing valve to down position,
driving the piston down quickly, prepare for the second time
squeezing .
Four, safe use and maintenance
1, to ensure safety that customers in the use of electrical
system in the process of work , the earth wire must be used as
protection measures, ensure safety first.
2, This machine power is **0 v , but it can be changed to
to **0 v according to customer needs , and supply two phase
motor, make sure of the normal use.
3, it is forbidden to use under the overpressure, and
adjust without authorization, disorderly open! In order to
avoid damage to the parts and affect production.
4, In the process of production , It is strictly prohibited
that debris fell into the oil box and inhale by the
pump. lift the oil pump suction valve ball , make the
machine can't production.
5, flexible pressure gauge is damaged, can't boot up production
before replace a new pressure
6, during high pressure and stable pressure period , its not
allowed to repair the machine.
7, if blocking, need to use single edge razor blades and feeler
to clean and shave .
8, When new machine has worked for 1 to 2 months, hydraulic
oil must be sucked out and need filter, precipitation and clean
up , after all of this , can be use again. In the following
years its
need be clean up once a year.
9, new type hydraulic oil press, in the operating process, please
accordance with the procedures used strictly .
Remark : random packing list:
1, the whole machine.
2, a operating instructions.
3, two sticky mat
国家: | China |
型号: | - |
离岸价格: | 获取最新报价 |
位置: | - |
最小订单价格: | - |
最小订单: | - |
包装细节: | - |
交货时间: | - |
供应能力: | - |
付款方式: | - |
產品組 : | - |