6kv Yrkk IC611 High Voltage Slip Ring Induction Motor 185-2000kw

Basic Secification of three phase, asynchronous slip ring motors, YR series
Structure introduction on slip ring AC motors

1. The boxed-type steel plate welded motor base is adopted to reduce the motor frame weight and increase the frame rigidity. This design also makes our slip ring motors easy to install and maintain.
2. We employ low loss and high strength round silicon steel plates as the raw material and adopt highly advanced punching technology, to produce the stator and rotor. Thus, the iron loss is greatly reduced and the efficiency of our slip ring motor is largely improved.

3. Both the rotor and stator of our slip ring asynchronous AC motor are of F class insulation. Wire inserting for stators can be finished outside the stator frame. The stator coil is a double layer formed coil which features good rigidity, and the inserted windings of the stator are processed with VPI solventless varnish.

4. The rotor core is shrunk onto the shaft and the rotor coil is tightly inserted into rotor core slots. Advanced brazing techniques are adopted for connecting rotor coils, which ensures the high mechanical strength and good conductivity at the brazed joints.

The rotor coil ends are banding fixed. After the rotor winding is vacuum pressure impregnated, the winding is connected to the slip ring unit. This rotor design provides the rotor with excellent performance against centrifugal forces.

5. For convenient maintenance and repair, the slip ring of this AC slip ring motor is mounted outside of the motor frame and at the non-drive end. Meanwhile, this slip ring design also shortens the distance between bearings, reduces the motor vibration, saves installation space and avoids the production of carbon dust due to carbon brush wearing, and more. Within the slip ring chamber, there is a cooling fan, and a filter for collecting carbon dusts.

6. Designed in standard rolling bearing structure, this slip ring motor can employ either grease lubrication or oil lubrication. If sliding bearing construction is desired, the lubrication methods can be oil ring lubrication, forced lubrication, or combinational lubrication