AAC plant, AAC production line

详情

AAC blocks manufacturing process
(AAC plant,AAC production line):
1. The raw material is stored in the material storehouse, after according to the automatic batching machine then enter into the pouring mixer.
2. Pour and enter to the mould after mixing evenly.
3. After precuring a certain temperature for a period of time, the base body reach a certain of hardness, the mould and base body are hung to the cutting machine by the sling. The sling is fulfill the following functions:
1)Titling the mould *0°in the air(one side plate of the mould become the bottom to support the base body until the finished product is steamed).
2)Hanged to the cart or the cutting support to open mould or demoulding.
3)The demoulded frame and returned side plate shall be reorganized into the mould and shall be ready for nest pouring after cleaning and oil spraying.
4. The base body then be cut on the cutting machine in six sides:
1)The base body carries on the side and cuts and mills the trough vertically.
2)Then carry on the vertical level to cut.
3)Cut horizontally finally.
5. The base body which is cut and the bottom are hanged to the steam-pushing car by the semi-product sling, then fed into the autoclave in groupe to be steamed under high temperature.
6. After a period of steam curing, then leave the autoclave and is hanged by the sling. The hardening plates arereturned.
Raw material of AAC blocks or light weight bricks: