详情
HY- E**2 addition molding
silicone is generally named two-components silicone rubber, Part
A and part B. It features an exceptional fluidity and good
operability.The mixing ratio is 1:1,mainly be suitable for making
molds application.
Applications
HY- E**2 addition
molding silicone could be mainly used for making concrete stones,
precision molds, PU molds, resin molds, gypsum casting, candle
molding,for life casting, fabric finishing, seal for electronic
components and solar circuit board, trademark decoration.
etc.
OPERRATING
INSTRUCTION of HY-E**2 molding silicone:
1. Stir part A and
part B with right mixing ratio (1:1) evenly. And get the mixture
for vacuum-pumping. (If there is no vacuumize , you can just pour
the mixture slowly from the corner so that less bubbles
caused)
2. Enclose the
product (the original model) with four plastic plates or wooden
plates.
3. Clean your
products and brush a layer of release agent (detergent or soap
water) on your product.
4. Pour the
mixture with correct mixing ratio into the model
frame.
After about **4
hours, when the silicone cured, get out the original model, and
there you get a finished addition cured silicone mold .
For get further
information about our silicone product, PLS contact
with Miss Cherry
TEL: ****************4
Mobile: ***************9
Fax:
***************0
| 国家: |
China |
| 型号: |
HY- E642 silicone
|
| 离岸价格: |
6.8 ~ 7.5 / Kilogram （面議）
获取最新报价
|
| 位置: |
SHENZHEN |
| 最小订单价格: |
6.8 per Kilogram |
| 最小订单: |
200 Kilogram |
| 包装细节: |
25kg/drum and 200kg/drum |
| 交货时间: |
3 days after receive your payment |
| 供应能力: |
8000 Kilogram per Day |
| 付款方式: |
L/C, T/T |
| 產品組 : |
mould silicone rubber
|
