详情
SKYPE :
mfbalmustafa - Mobile : + *0 **5 **0 *1 *5 ( Whatspp, viber
..)
AIRKOM OIL
FREE & OIL FREE HIGH PRESSURE
PISTON AND SCREW TYPE
*- Food and beverage, medical, laboratory and
industry and wherever oil-free air is
required
*- Pistons and piston rings made of corrosion
and high temperature resistant special Teflon coated
material
*- It does not require maintenance (excluding
air filter) for *0,**0 hours (or four
years)
It is designed based on oil free operation
principle according to 8.5 / *0/*4 bar operation pressure and
power range from 0.*5kw up to *1kW.
Compressor block is supplied by the Japanese
Annest Iwata Company. It is driven by V-belt
pulley.
V-belt tension is easily adjustable with belt
and pulley tensioning system.
The compressor is started directly with motor
protection switch up to 4 kW motor power types, and with
star-delta control panel up to 5.5kW motor power types and
more.
Compressor is driven with F proof, IP*5
protected, IE2 efficiency asynchronous electric
motor.
The cabin is designed according to the most
appropriate operating conditions: Vibration is minimized by use
of rubber wedges in various sections. Noise is reduced to a
minimum with non-flammable sound insulation foam covered on the
cabin's interior surfaces. Facilities are provided to make easy
service applications with push on-off-locking system mounted on
the cabin covers.
Preference to be able to start with mono-phase
electric motors for the types with power up to
4kW
It is air cooled: Cooling is ensured by the air
flow generated by the flywheel fan through intercoolers and
after-coolers
Operation control (idle -loaded operation) is
provided by the pressure switch.
Monitoring the pressure condition in the system
is maintained with a manometer
The system is provided with safeguards against
excessive pressure with a safety valve set to *1 bar value of the
compressor operating pressure.
Air filter element is introduced into a plastic
filter cup allowing easy replacement.
Easy pass of the compressor to loading position
is ensured with 2 / 2Y discharge solenoid valve mounted on the
collector.
Compressor operating hour is ensured by the
clock counter integrated into the control
system.
Space savings are achieved with the compressor
unit being mounted on galvanization coated air
tank.
The air tanks are designed and produced
in accordance with the ***9/**5/EC
directive.
The air outlet on air tanks must be fitted with
a ball valve. However, a mini ball valve is also used for the
evacuation of condensation water under the
tanks
Hand hole is added on the air tank providing
ease of service.
High Pressure *0 Bar
Oil Free Compressors EYPS-Type Oil Free Piston Air Compressors
(***********0 bar) OIL FREE, HIGH PRESSURE, HIGH-OUTPUT,
MULTI-STAGE, SLIDING BEARING WATER COOLED, V-TYPE PISTON AIR
COMPRESSOR.
AIRKOM has
realized a first in our country as a result of long R&D
activities; we are proud to have carried out the first production
of an oil free, high pressure, high output, multi-stage, water
cooled piston air compressor made *0% from local materials,
compliant with EU regulations and standards, generally used in
the production of PET bottles. This design is not only produced
for PET bottle production, but is also produced suited to all
other sectors working with oil free and continuous pressurized
air. For example, in accordance with the compressed air needs of
a business in production, lower bar, higher or lower output
designs can be carried out according to customer
demands.
Product
Specifications
• Casting, molding and machining
processes of main parts are carried out within DİRİNLER GRUP. In
this way, about *0% portion of the compressor system is
manufactured under our supervision.
• Valves, piston rings and sealing
elements are exclusively designed for this compressor by
HOERBIGER Company which is a pioneer in the
industry.
• Each piece is designed using
ANSYS CAD program. Thus, the most appropriate materials and
design are determined with the execution of durability and
thermal calculations.
• It is V-Type with 3
stages.
• Body and stage cylinders are made
of AN GJL***0 cast iron materials and stress relief operations
are implemented and treated as
sensitive.
• The crankshaft is integral and
made of EN GJS ****3 ductile iron cast. Stress relieving
procedures are made. After processing, operating surfaces of
bearings and connecting rod handle are
grinded.
• Connecting rods are two-piece and
made of EN GJS ****3 ductile iron material, processed after the
surface tension relieving treatment. Operating surfaces of
connecting rod on the crankshaft are cavernously processed
according to the crankshaft diameter after being coated with
special alloy materials.
• All stage cylinders are
controlled by a hydrostatic pressure test prior to
mounting.
• Air pipes in the - output
line between stages are controlled by hydrostatic testing after
being x-rayed following the welding
process.
• The linear motion of
1st and
2nd stage
piston shafts is provided with the sliding bearing
piston.
• 1st and
2nd stage
pistons and sliding bearing piston are casted from special alloy
aluminum material and processed after stress relieving treatment
is finished.
• 1st,
2nd and
3rd stage
pistons are made of PTFE material which is exclusively designed
for ESKOM and long lasting.
• Suction and discharge valves at
all stages are exclusively designed and manufactured for
ESKOM.
• Both sides of the crankshaft are
supported with bearings.
• Compressor despite producing
oil-free air is lubricated automatically by an oil pump driven by
the crankshaft for the purpose of lubricating certain mechanical
parts.
• Oil scraper packages and pressure
seal packages at 1st and
2nd stages
are available to prevent oil penetration into the air through
piston shafts.
• Compressed air stepping out of
the stage cylinder firstly passes through the water-cooled heat
exchanger and goes to the other stage after being cooled. There
is a safety valve crimped in the water
separator.
• After complete installation of
compressor block, its connections together with other components
are made on robust NPI profile chassis. Moreover, 6 vibration
isolating bellows are placed under the
chassis.
• The compressor and motor
connections are provided with V-belts. There is an easily
adjustable tensioning system.
• Compressed air emerging from
1st,
2nd and
3rd stage
cylinders is controlled by temperature and pressure
sensors.
• Stage cylinders are cooled with
the circulation of water from a closed system of water cooling
towers.
• **-bar air tank is manufactured
in compliance with CE standards and regulations and a hydrostatic
pressure test is applied after source X-ray is taken and
assessed.
• Closed loop water cooling
tower
• Circulation
pump,
• Air dryer and
filters
• Operating status of the
compressor, pressure and temperature values, outlet pressure and
temperature values of the stages, water temperature and flow
values, maintenance times, information showing that it is time to
replace spare parts, faults, PTC errors etc. can be followed
through LCD screen.
SKYPE : mfbalmustafa -
Mobile : + *0 **5 **0 *1 *5 ( Whatspp, viber
..)
| 国家: |
Turkey |
| 型号: |
LENTO 15A
|
| 离岸价格: |
42000 ~ 46000 / Unit （面議）
获取最新报价
|
| 位置: |
germany |
| 最小订单价格: |
42000 per Unit |
| 最小订单: |
1 Unit |
| 包装细节: |
palet |
| 交货时间: |
5 |
| 供应能力: |
50 Unit per Month |
| 付款方式: |
Western Union, D/P, D/A, L/C, T/T |
| 產品組 : |
AIR COMPRESSORS
|
