详情

Airbrush Gun 116 Dual Action Spary Trigger Pen For Personal Care Beauty Facial Makeup

Specifications:
Name: Airbrush Set
Nozzle diameter: 0.3mm
Work pressure: 15-50 psi
Switching mode: push-pull double-action switch
Spraying distance: 50-100mm/1.97-3.94inch
Paint cup capacity: 7CC, 10CC
Pistol Grip Easy To Handle & Use
SideFeed Gravity Airbrush
Fitted With 0.5mm Needle / Nozzle
Can Also Be Fitted With 0.2mm or 0.3mm Needle / Nozzle

The  Airbrush 116 is a pistol style, single variable action, gravity side feed airbrush.

A pistol grip design is ideal for those new to airbrushing as it provides the most comfortable holding position.

Single variable action, pull back on the trigger for air and pull further back, on the trigger, to release paint.

The Airbrush 116 is fitted with a quality 0.3mm needle, nozzle and nozzle cap.

This set up is for general purpose spraying and will allow you to create a line spray width up from 0.5mm to approximately 28mm.

It can also be fitted with a 0.2mm needle/nozzle set for creation of finer lines and greater detail.

Alternatively it can also be fitted with a 0.5mm needle/nozzle set which is ideally suited to those wishing to spray slightly thicker mediums or cover a slightly larger spraying area .

The  Airbrush 116 comes with two side feed paint cups:

7cc & 10cc (with push fit lids)

Features:
Suitable for airbrush dia 0.3mm.
Works great and fun to use on the model kits.
Single action, simply push trigger to spray.
Widely used by the general model enthusiasts.
The airbrush performed flawlessly and is easy to clean.
Wide range of applications: cosmetic, facial, model making, cake decorating, tattoos, nail art, etc.
How to spray
1. Fill fluid in the cup after thinning appropriately.
2. Hold the airbrush lightly in your hand.
3. By pressing the main lever, a stream of air emerges. Then draw it backward gradually for color atomization.
4. The spray pattern is in accordance tith the distance between a work surface and a airbrush.
5. For fine line spray, remove the needle cover and hold the air brush near a work surface.
Maintenance
◆ Empty the fluid cup and wash with water or solvent by a brush.
◆ Refill cup with water or solvent, then block the needle cover with a finger and spray.
◆ The air flows backward into nozzle to clean the paints remained the airbrush.
Package List: