Autoclaved Aerated Concrete Block Machine

详情

Autoclaved Aerated Concrete Block Machine

    1 light weight ,Areated concrete density is usually ******0kg/m3,(according the market in produce ),same as 1/3 of clay block and  1/5 common concrete.So use the Light block can reduce the weight of the build more,and also reduce the  beam of roof and pillar press best.then you can see,it can save the material and cost,it also fighting shaking.

    2 keeping temperature It has many are porous,the delivery hearting coefficient is 0.**0.*2W/(mk),the same as  1/4 or 1/5 of clay brick,so it is best  materials now in the world.

have many kinds material,have lowest waste

Main Material:coal ash sand waste mine material coal stonestone dust and other silicon materials.

1. Product weight is according to **0kg/m3 to control.

2 .annual capacity **0,**0M3.

3. set raw  material proportion: cement 6.5%, raw lime *3%, flyash *8%, gypsum 3%, aluminum paste powder **0g/M3.

4. water and material rate 0.**1

5. one mould product 2.*8M3

6. Casting slurry cycle time **6 minutes, cut cycle time 5 minutes.

7.casting slurry temperature ****2 degree

8 .body quiet stop. Time is 1.**2.5housr, temperature ****0 degree, after quiet stop body strength is 0.***0.*8Mpa

9 .Steam curing cycle time, come in and out autoclave about 0.5hour, steam curing cycle time about is 6 hours/1.6Mpa, total 6.5 hours.