This Battery Charger
's main functions are
1) Low vlotage battery sensing function.
-It automatically stops charging when the
battery is aged or connected to a low voltage
caused by a defective product. In this case, the 'Red LED
-> Green LED' flash in turn. 2)
Internal temperature sensing function. - If charging the
battery in a place with a high temperature, causing the
rise in the internal temperature of the
battery, it automatically shuts off the to protect the
charger, and
the Red LED -> Yellow LED -> Green LED flash in
turn. - If the internal
temperature of the charger rises above *0°C, the charging
is reduced by *0% at every 5°C increase,
and it automatically stops charging above *0°C. (*0% of the charge
capacity at *5°C) - It will be
re-operated as the internal temperature of the chager
decreases. 3) Over-voltage and over-current
protection functions. - In case of an
external overvoltage and battery malfuction, it
stops operating by the internal protection
function. 4) Battery sensing function while
charging. - When the charger
output line is disconnected or, no charging current
in the
battery, it stops charging. 5)
Selective Function by battery capacity - Check if the switch is
properly selected according to the capacity of
the battery as the main body of the
charger has a rotary switch to select
the charging current by the battery
capacity.
. Charging a
battery 1)
Connect the charger power line to the power
outlet. 2)
Check the Red LED flashes. 3)
Connect the output line connector to the battery
connector. 4)
Check if it beeps. 5)Check
the fan of the charger works.
-When the fan is being operated, it
makes a fine
noise. 6)LED
indication while charging. 7)
Make sure the charging is
complete.
- It beeps 3 times.
- Green LED turns on.
- Fan stops working.
