详情
Product Description
Led T8 Tube 1.2M *8W
1.Model: TPL-T*1.2M**8W
2.CE&ROHS certification
3.3years warranty
Specifications
1.Base:G*3
2.Working Voltage:AC*****5V,****0Hz
3.LED brand:Epistar
4.LED:SMD***4(*2lm/LED),SMD***8(7lm/LED)
5.Beam Angle:**0 Degree
6.Driver:Isolated or non-isolated driver
7.Dissipation Material:Aluminum
8.Plastic Cover:clear/striped/frosted
9.Dissipation:Aluminum
*0.Color Temperature
Warm White:***0K****0K;
Neutral White:***0K****0K;
Cool White:***0K****0K
*1.CRI>*0
*2.Power Factor>0.9
*3.Lumen Decay:1% in 3,**0 Hours
*4.Lifetime:*0,**0Hours
*5.Certificates:CE(EMC,LVD),RoHS
*6.Packing:Carton Tube
Product Feature
Advantages
Use Taiwan Epistar chip, can resist higher anti-static and own
higher brightness, each SMD can reach **7lm at least.
Wide voltage ranges from AC*****5V, it is still safe when the
voltage is unstable.
Scientifically design to avoid Led failure. One led failures, the
others will still work well.
Aluminum and PC cover, hard to be damaged and easily
mounting.
Can light up to 5 years at least and with 3 years warranty
No need ballast and starter when using.
No UV or RF interference, No mercury, No noise
CE & ROHS certifications
Product Specification/Models
T8 LED Tube Light Installation Instruction:Step 1Find out what
your light fixture type is? There are two types, one using
magnetic (inductive) ballast, let us call it MAGNETIC BALLAST
TYPE. The other one using Electronic ballast. Let us call it
ELECTRONIC BALLAST TYPE.The easiest way to tell which light
fixture you have is by looking for a 'starter' The MAGNETIC
BALLAST TYPE has 'starter' while the ELECTRONIC BALLAST TYPE
does not.
Step 2Turn power off before installation. Wiring the fixture to
use the LED tubes is simple, but should be performed by a
qualified person.For MAGNETIC BALLAST TYPE, only remove the
starter from light fixture; do not need to remove ballast. Also
you can remove starter and ballast if it is convenient.For
ELECTRONIC BALLAST TYPE, remove/bypass the electronic ballast
from light fixture. Do not install the LED tube without
removing/bypassing the electronic ballast as damage to the LED
tube may occur.
Step 3Install T8 LED tube light to the light fixture. Turn power
on.Show you in Sketch
(a) ELECTRONIC BALLAST TYPE, Electronic ballast
removed/bypassedThe two pins at each end of the LED tube are
connected together. Simply apply one side of the **0 Volts (or
**0 Volts) AC to one end of the tube (either pin) and the other
side of the **0 Volts (or **0 Volts) AC to the other end. Power
can be applied to either pin.
(b) MAGNETIC BALLAST TYPE, Starter removed(c) MAGNETIC BALLAST
TYPE, Starter and ballast removed Notes: Safety First!- All
electrical work should be undertaken by an electrician who is
fully qualified and registered. When installing LED Tubes please
ensure that appropriate health and safety precautions are taken,
including ensuring that the light fixture is properly isolated
before commencing work.Under no conditions: DO NOT connect power
(positive & negative) to the two pins at one end only. If
they are connected together (positive/negative): you will create
a short circuit!Installation of LED Tubes to a fitting that has
not been modified in accordance with the above instructions will
result in damage/Failure of the tube. Incorrect modification of
the fitting may also result in damage/failure of the tube. Either
of the above will invalidate the warranty.
Application
1.Workshop and warehouse
Compared with the traditional lamps, LED tube would be better to
protect the employees' eyes and body.
2.Supermarket&Department Store(especially in freezers)
3.School&office
Safe and reliable, no flicker, the light is soft and pure,
effectively relieve eye fatigue, no UV and no damage to human
skin.
4. Hospital, municipal building, square and other places.
Other Information
Guarantee
1. *2 months Manufacturer's limited warranty for defective items
(excluding items damaged and/or misused after receipt).
Accessories come with a *-month warranty.
2. Defective items MUST BE reported and returned within the
warranty period (and in the original packaging, if possible). You
must tell us what the defect is and give us your order number. WE
DO NOT REPAIR OR REPLACE ITEMS WITH EXPIRED WARRANTY.
You agree to all of the above-listed policies upon ordering on
aliexpress!
Feedback
We maintain high standards of excellence and strive for **0%
customer satisfaction! Feedback is very important. We request
that you contact us immediately BEFORE you give us neutral or
negative feedback, so that we can satisfactorily address your
concerns.
Our Service1)Your inquiry related to our products or prices will
be replied in *4hours.2)Well-trained and experienced staffs to
answer all your inquires in fluent English3)OEM and ODM,any your
customized lightings we can help you design put into
product4)Distribute ownership are offered for your unique design
and some our current models5)Protection of your sales area,ideas
of design and all your private information.
国家: |
China |
型号: |
TPL-T81.2M-18W
|
离岸价格: |
( Negotiable ) (面議)
获取最新报价
|
位置: |
China |
最小订单价格: |
- |
最小订单: |
25 Piece |
包装细节: |
Carton |
交货时间: |
2weeks |
供应能力: |
2000 Piece per Day |
付款方式: |
T/T, Western Union, Money Gram, PayPal |
產品組 : |
Led T8 Tube Light
|