The
S ****0/SE ****0/S ****0 DUOis a movable brake maintenance
device for the use of *0 *0 l canisters. Therefore the device is
suitable for garages of all sizes. With the help of the S ****0/SE
****0/S ****0 DUO hydraulic brake systems and hydraulic clutches of
passenger cars, commercial vehicles and motorcycles can be
maintained. The change of synthetic brake-fluid is done fast and
without any problems. The complete ventilation of the brake system
assures the functional safety of the ABS- and SBC-systems. The easy
movement of the wheel-brake cylinder can be checked as well as a
leakage test at the brake- and coupling system after repairs. The S
****0 DUO offers the pre-draining of the brake fluid out of the
brake-fluid reservoir of the vehicle.
Description
Optical fill level indicationby three control lights (one red
control light at SE ****0). Electrical powered pump:After switching-on the pump the
pressure builds up
slowly. This prevents a foaming of the brake-fluid with air because
of the small flow
velocity. Automatic switch-offof the pump when reaching the minimal
capacity. Therefore no
air will get into the hydraulic system. A separation of the device
while changing the
containers is not necessary, the ventilation process can be
continued immediately. Infinitely adjustable pressure regulationfrom 0.4 to 3.5 bar
with manometer
indication and low pressure test. Pulsating liquid currentof the brake-fluid. These
oscillations make a complete
ventilation of the pipes possible, because even the smallest air-
and humidity locks at
the pipe walls are getting carried away. Automatically pressure decreasewhen switching off the
device. The device can be
disconnected from the adapter without pressure by the quick
coupling. There is no
overflow of the brake fluid. The 3.5 m long inflating hose makes
the ventilation possible on every car lift without any problems.
With a converter lockup switch (not for SE ****0)the
remaining quantity can be pumped over a new can in case of
change. Simple handling, therefore no training is necessary.
Suitable for ABS- and SBC-brake systems.
Technical Data: Electrical
connection: **0 V/*0 Hz, optional **0 V/*0 Hz or *2 V
Dimensions (LxWxH) in mm: **0 x **0 x **0
Weight: about *4 kg
Order-No.:
***2 (S ****0)/***3 (SE ****0)/***5 (S ****0 DUO)
Scope of delivery:
Tank tube and adapter for ****0 liter canisters with a 2 screw
connector ****8, bottle
holder (not for SE ****0) and standard adapter ****2.
Catch bottle optional for manual disposal or with adapter for
SET-Schrder or ATE
disposal systems for used brake fluid (S ****0 Duo only).
Accessory:
Catch bottle (****6), adapter for containers with a pull-out
plastic tap (****5) and
adapters for almost all vehicles. Complete disposal system for used
brake fluid.