详情
Specification of *2V Digital Batter Analyzer
Product length: **0mm Product
width: *0mm
Product thickness: *5mm product weight:
**0g
Clincher length: *5mm Clinker
width: *8mm
Leading Wire length: **0mm
Product
Features:
1.Based on sonar reflection principle, all the indexes of battery
are analyzed by accurate and special alternating current signals
which lead to very accurate testing results.
2.Simple three-step test procedure provides a comprehensive
analysis of batteries in seconds. (see below)
3.Designed in Taiwan, high-quality & CE FCC approved to
guaranteed safety and has patent protection.
4.Products easy to carry and has stable and shaking-resistant
quality.
5.The clips of product have maximum *6 degree open angle degrees,
fit for different kinds of vehicle testing.
6.With the special design of a hook at product's back, product
can be hung up on the wall or stand on the table.
7.Product is covered with a gray soft case which remains product
in sanitary condition and is washable.
8.Continuous testing would not damage battery, safety is
guaranteed.
Simple Testing Procedure:
1. Clip the product leads to battery terminal.
2. Turn on and CCA value .
3. Checking results display
Necessary Information for
User:
In order to test the accurate battery capacity by the product,
it’s necessary to fulfill to following conditions for testing at
the same time:
1.Testing carried out at the temperature around *5 can get the
accurate CCA value. Both of extreme cold and intense heat affects
test result.
2.The battery should be fully charged before testing
3.It’s necessary to the correct CCA value for testing. (The
value is available in the indication information on the battery
or on website of the battery manufacture)
4.Vehicles must be turned off over half hour for the battery
testing. Freshly fully charged battery should be tested after
half hour.
5.The clinchers of the analyzers should be clinched correctly on
the positive and negative terminals of the battery.
6.The analyzer is designed for single *2V battery. Please don’t
use on series connected batteries.
7.Keep from heavy failing and breaking. No assembling or
disassembling of the product y non-professional staffs. Suppliers
are not in charge of the product repair when the damage is caused
by improper usage.
The Digital Battery Analyzer is an essential tool for all Car
installers, technicians and battery dealers. Simple to use, it
performs a complete analysis of battery condition in mere
seconds, then displays conclusive data on a large clear LCD
readout. It provides information on battery voltage, battery
condition and available battery power and gives you empirical
data to assure your batteries are fine, or to recommend you it
should be replaced in order to prevent car broke down on the way
because of bad battery.
| 国家: |
Taiwan |
| 型号: |
C&G
|
| 离岸价格: |
（面議）
获取最新报价
|
| 位置: |
Taiwan |
| 最小订单价格: |
- |
| 最小订单: |
10 Piece |
| 包装细节: |
- |
| 交货时间: |
within 3~7 days |
| 供应能力: |
1000 Piece per Week |
| 付款方式: |
T/T, PayPal |
| 產品組 : |
- |
