China Waste Used Engine Oil Motor Oil Tyre Plastic Pyrolysis Oil Distillation Refining Plant

详情

whatsApp ***6 **2 ***5 ***8

1.Usage

KTS-R Series waste oil distillation machine is widely used in car dealer, for distilling waste oil,waste industrial lubricant oil,waste hydraulic oil,waste diesel and waste gasoline, etc. It is applied with the vacuum distillation technology, which can renew all the waste oil into based oil, with features of low cost, high recovery up to *5%, environmental and energy-saving.The waste lubricant oil recycling is not only renew the waste oil, but also reduce the pollutants. It is the first option for waste oil recycling enterprises,and it will bring the greatest economic and social benefits to companies.

2.Introduction for high vacuum molecular distillation technology in waste oil distillation machine

2.1 Waste oil distillation machine with high vacuum molecular distillation technology can convert used engine oil to diesel and base oil . And its technology parameters are as following:

(a) The temperature in the first distillation is up to **0~**0℃, the pressure is about **0~***0Pa.Product is gasoline and diesel .

(b) The temperature in the second distillation is up to **0~**0℃, the pressure is about *0~**0Pa.Product is light lube base oil .

(c) The temperature in the third distillation is up to  **0~**0℃, the pressure is about 1~*0Pa, Product is heavy lubricant oil base oil, the residue can be used as the fuel. In the process of distilling the waste lubricant oil, it will not go through the chemical reaction about pickling, alkaline cleaning, decolorization and precipitation, and no discharge of sodium salt or decolorant, so there is almost no pollution to the environment. The distilled base oil can be made into new lube oil after add suitable additives, its flash point and viscosity can meet the national standard.

2.2 Economic benefits

(a) 8% light oil

(b) *6% the heavy lubricant oil or the light diesel

(c) *3% resins or heavy oil

(d) high quality recycling oil, it will not be oxidized or discolored with air contact.

(e) low cost and high efficiency, the catalyst cost in dealing one ton waste engine oil is about $*0.

(f) high automation and uncomplicated operation, it can be operate with only 1 or 2 persons. The time for learning is about 3 to 4 days.

3.Technical Features of waste oil distillation machine

The boiling point under high vacuity is lower than usual. It takes use of multi- level high vacuum distillation technology,and our company acquired different dewatering temperature and different distillate in researching the mineral oil, this provide us related parameters in separating light and heavy oil under the high vacuity. Since the boiling point is much lower in the high vacuity, so the molecule will not degraded or chain broken. The end oil can not only make the flash point or viscosity qualified, but also meet or exceed the original oil quality standard.

FAQ

1.What's the final product after process?

 *0% **5% base oil, 5% light oil, or *5% **0% diesel.
 

2.What's the daily disposal capacity? 

 ***0TPD.

3 What's the main content of your machine?

PLC system can make the operation easily and save labor cost, thermal oil heating system will do no pollution to the air, the vacuum system avoid the base oil pyrolysis and maintain the oil quality, strong steel to keep the machine live longer time.

Yes, catalyst will keep the recycled oil stabilization, used that recycled oil oxidized and become black again. So the recycled oil from our machine will keep yellow.

5, Is your machine running continuously?

A: Yes, our machine is running *4hours continuously, But our machine can also be switched into batch by batch, according to your labor working time

6.What kind of raw material does the machine treat?

All kinds of engine oil, car oil, motor oil, ship oil, tire oil and pyrolysis oil.

7.What is your material of your machine?

Carbon steel or Stainless steel (Standard type is SUS**4, it can be customized according to your request)

Yes, we can customize the color, industrial power and your logo on machine. On the other hand, if you need the brand ingredients on the machine, you can have the choice on the imported pumps electrical (electrical, Controller ,PLC, touch screen LCD controller )