详情
Fume produced in sintering process
enters desulfurize tower through stack flue in the tower, fume
firstly take reaction of foam sucking with Ca(OH)2 density liquid
in the tower, and then react with spraying serous fluid atomized
with multi-layer rotary spraying to produce sulfurous acid Ca for
implement dual converse foam sucking technology which combine
foaming sucking technology with spraying atomized suck
technology. Fume which is produced in sintering process, and go
through sulfuration in the
tower, is discharged into atmosphere from newly setup chimney
after water-mist is removed from it by demist device. sulfurous
acid Ca slurry produced by desulfurater reacting with fume is
transferred by liquid discharging pipeline to oxidized system for
implementing oxidization out of the tower.
A、 To
change oxidized in tower into oxidized outside of the tower
B、 To adopt foam sucking technology and spraying
atomized technology
C、 7 patent technologies
2. Technology
Characteristics
1)
Bigger desulfurization capacity, higher desulfurization
efficiency, and adapting to lime, limestone, dedusting for line
kiln
2)
Adapting to wider density scope
of fume sulfur dioxide, higher
adaptability.
3)
Less equipment invested,
comparatively lower investment
cost
4)Lower
ratio between gas and liquid, the power for the cycling pump in
the desulfurization tower is largely reduced to save
energy.
5)Gesso produced after
desulfurized is transferred to cement plant nearby, brick plant
or groundsill treatment engineering for synthesis utilization,
without secondary pollution problem.
6)
Convenient operation, lower
failure ratio
3. Technical guarantee
value
1)
Fume desulfurized efficiency ≥*5％（SO2density at
exit:***0mg/Nm3);
2)SO2 discharging
≤*5mg/Nm3；lowest up to *0
mg/Nm3 ;
3) Fume discharging density ≤*0
mg/Nm3;
4) Fume temperature
≤*5℃.
| 国家: |
China |
| 型号: |
-
|
| 离岸价格: |
（面議）
获取最新报价
|
| 位置: |
- |
| 最小订单价格: |
- |
| 最小订单: |
1 Unit |
| 包装细节: |
- |
| 交货时间: |
- |
| 供应能力: |
- |
| 付款方式: |
L/C, T/T |
| 產品組 : |
- |
