详情
2. Technical Parameters:
1) Production scope: the diameter of the conductor: 1.**8mm
Finished diameter size: 2.***0mm
2) Extrusion capacity: Max *0kg/hr
3) Motor Power: *5kw (frequency conversion)
4) Heating power: *6kw (three section heating with air cooler)
5) Center height of the machine: ***0 mm
6) Pay-off spool specification: diameter **0mm (PN ******0mm)
7) Take-up spool specification: diameter **0mm (double spool)
3. Composition of the
equipment
1) **0mm No-spool
pay-off
2) Elevating tension
straightening machine
3) SJ*5 extruder
4) Water cooling sink
5) Dry-printing device
6) Diameter measure
device
7) **0 mm/ **0mm wheel
traction machine
8) **0mm double spool take-up
machine
9) Control box
4. The technical parameters and
structure of the main part
1) Diameter **0 No shaft
pay-off frame
It is used the Manual
single-arm up and down screw pay-off frame, the spool was fixed
on its top. Ensure its placidly when paying-off
2) Elevating tension
straightening machine
It is fixed by two columns,
Make sure the tensioner slide up and sown smoothly. The tension
magnitude can be chosen at random
3) SJ*5
extruder
**3 type Hard tooth surface
reduction gearbox, screw, sleave are all made of good
Quality
*8CrMoAL steel materials, processed
by nitrogen treatment, the thickness of the Nitride
layer is 0.4 to 0.8mm, Hardness HB
is more than or equal to **0, screw scale length ratio diameter
*5: 1, Designed specifically for processing PVC, PE cable. The
power of the electric machine is *5kw. The host was heated by
Metal heater or Cast aluminum heater, the temperature was
controlled by Homemade premium temperature table, automatic
cooling by air blower, 4 section heating. the temperature will be
controlled accurate to plus or minus 2 centi-degree. It is
convenient to operate so can save time and labor at last. (The
maximum aperture diameter is *8mm), the plastic output: (PVC or
PE) PVC is more than or equal to *0kg/hr.
4) Cooling sink
The length of the Stainless
steel sink is 6 meters, the Height can be adjusted.
5) Dry-printing device
Using **0w pressurized air
pump, can dry away the water of the cable surface effectively,
ensure the printing firm and clear.
6) Counting device
Using mechanical revolution
counter to count the meters, bevel gear drive. Ensure the
accuracy of the meter.
7) Traction machine
It was made of milling after
low carbon steel plate welded with the tank, all the gears are
cast steel processing gears, three stalls, noise-free when
transmission, stable and reliable.
Main traction wheel diameter:
**0mm
Passive wheel diameter:
**0mm
The stall can be changed
randomly according to the line speed, no oil-leaking
8) **0mm double spool take-up
machine
The take-up machine was made of
milling after low carbon steel plate welded with the tank,
sprocket transmission, double take-up drums can be changed
easily, using torque motor, the tension magnitude can be chosen
at random.
9) Control box
Using frequency or speed control
device, speed stable, reliable quality, the temperature was
controlled by Homemade premium temperature table, the temperature
will be controlled accurate to & plusmn; 2
centi-degree.
| 国家: |
China |
| 型号: |
SJ65/25
|
| 离岸价格: |
32000 / Set （面議）
获取最新报价
|
| 位置: |
Hebei province |
| 最小订单价格: |
32000 per Set |
| 最小订单: |
1 Set |
| 包装细节: |
Plastic wrapping and protected by sturdy steel shelves. |
| 交货时间: |
Shipment to be effected within 45 days upon 30% do |
| 供应能力: |
50 Set per Month |
| 付款方式: |
T/T, L/C |
| 產品組 : |
Wire and cable machine
|
