Festoon/211/C5W, LED Interior Lamp, Reading Lamp, License Plate Lamp, (212, 6418, 7065, DE3022, 6418)SV8.5

详情

Socket Type:Festoon(USA:**2,***8,***5,DE***2,European:***8，***1)SV8.5,**1/C5W Light,***1, ***2, ***5, ***8, ***0, ****2, DE***5,***3,***1,***1, ***5, ***6, ***1,**0, **9, **8,****2, ***2, ****2, ***2, ***3, ***9, DE***1, DE***2, DE***5,***3, ***5, ***1, ***3, ***8, DE***5, DE***0, ****4,***9,***1


Can bus led

Model:**1A8W-H

Lumen:**6lm

LED QTY：8pcs ultra bright smd***0

Voltage: *2V DC (that is, the output voltage of a normal car)

Current:0.**5A

Wattage:0.3W

Dimension:*5.*7**1mm/*9mm

Weight:5.7g

Uses: reversing lights, turn signals, reading lights, license plate lights, door lights, tail box lights, foot lights, etc.


Available colors: white light, blue light, red light, yellow light, green light

World LED Car Bulb Material advantage:
1.High power LED beads are from USA KERUI,Netherlands Feilipu,Germany and OUSILANG. SMD beads are from Taiwan Jingyuan.
2.The resistor,capacitance and electrical inductance,it is imported from Japan Murata and TDK.
3.Driver constant IC are imported from PI/TI USA PT***5.
4.We use *0mil big IC rectifier bridge which imported from Japan Murata and TDK.
5.Diode are used from Taiwan military level SS*4.
6.We use double painted aviation grade aluminum PCB on high power led car
bulb,like Kerui,Feilipu.And double painted fiberglass PCB on low power led car bulb.Aluminum aviation grade PCB thickness is 2mm.Fiberglass PCB thickness is 1.6mm and 1mm.
7.We use gold wire pure copper bracket lamp beads.High efficient heat dissipation.
8.We use the most expensive thickening red copper as ***6/***7/BA9S socket.
9.Lens are HD high temperature resistant spotlight lens.
*0.T*0/T*0/T*5 socket are high temperature resistant plastic base.

Light source:

1. The product adopts imported SMD chips, and the ultra-thin board shape design makes the installation and fit better, the illumination is more uniform, and avoids the disadvantages of poor illumination width caused by the point light source; This SMD product has the characteristics of light diffusivity, wide-angle illumination and high lumen;
2. No delay in lighting, high light purity, strong color rendering and penetrating power;
3. Using LED light-emitting diodes, low power consumption, can better protect the car circuit;
4. LED has no filament, good heat dissipation, low current, low heat, and the vehicle circuit is not easy to oxidize;
5. Strong shock resistance and low temperature rise, it is a new generation of revolutionary solid-state light source;
6. Suitable for DC ****3V.

【Product Note】:
No need to modify the circuit, directly replace the original traditional glass bulb, pay attention to the high temperature of the original bulb to prevent burns!
When installing, refer to the product dimensions and pay attention to the size of the installation location. Press carefully and do not squeeze the LED chip to avoid damage. If the LED has positive and negative polarity, if it is not on, turn the direction and reinstall;

【LED Features】:
1.Low current,high brightness,low power consumption,long life span.
2. It can directly replace the traditional tungsten bulb of the original car;
3. The LED has high luminous purity, no need for lampshade filtering, and the light wavelength error is within 5 nanometers
4. There is no delay when the LED lights up, while the traditional tungsten bulb has a delay of 0.3 seconds.
5. LED has low power consumption. When it reaches the same brightness of traditional bulbs, it consumes only 6% of traditional bulbs, and it also saves electricity and fuel!
6. It has a long life, its filament-free structure does not generate heat, and it can be used for more than 6 years under normal conditions
7.Works for Trunk Light Bulb,interior lamp,reading lamp,license plate lamp,show blink lamp,dome light and etc.
8. SMD***0 LED chips,which will provide a perfect beam pattern,high light output,low power consumption.
9. European and newest vehicle equipped with CAN-BUS system may require load resistors to bypass the error codes/flicker issue when intall as trunk Light Bulb,interior lamp,reading lamp,license plate lamp,show blink lamp,dome light and etc.

This item fits for these sockets:


Note:Please confirm your socket before making an order. Thank you.


Q&A

Q: Does this led lamp fit for my car?
A: Suitable, but you need to confirm the socket type of your original halogen bulb.

Q: When do you ship my order?
A:World will send the order within *8 hours (except the holiday) after the payment verification.

Q: Do I need to pay custom clearance taxes?
A: Yes, Consumers have the obligation to pay tax and clear customs. So all the buyers should do it consciously

Q: Can I trust the posted picture?
A: Yes,World promise the photos is **0% correspond with real product, If the product is not as described, we will refund to you. Note: Pls know that colors may be different due to variations between the computer monitors setting and naked eyes color difference

Q: Can I return the product if I don't like it?
A:World provide *5 days Free Returnand you needpaytheshipping costfor returning.

Q: Does this item have guarantee?
A: Yes,World provide 1 year warranty.

Warranty Terms:
1.This Warranty covers the defects resulting from defective parts, materials or manufacturing, if such defects are revealed during the period of *2 months since the date of purchase.
2.The warranty covers only the products delivered according to valid online orders, but not their installation.
3.The product is considered defective if it fails to perform the functions described in the above specification or exceeds the average nominal failure rate.
4.The warranty does not cover the normal reduction of light output and the shift of the light color temperature during the lifespan of the LED chips.
5.The warranty does not cover damage due to negligence, misuse, or improper installation.
6.The warranty lapses immediately when there are modifications or repairs done without prior permission from us.

Warranty claims:
Feel free to contact us to file a warranty claim, if you believe you are experiencing defective products. The warranty services will be provided promptly upon meeting the following conditions:
1.Cease the use of defective products and report the technical problems to us.
2.Provide the proof of purchase that matches the order number, product serial number or other numbers for product identification and date of purchase.
3.Photo or video of defective products, with at least one frame where the product item and its intact serial number are all captured.
Once a warranty claim is validated, we will send you a replacement, or make a partial or full refund according to the severity of defects. We reserve the right to charge the cost for delivering a replacemen