详情
SF/XJK floatation machine features:
1.Large air-absorption capacity
2.Low energy consumption
3.High concentrate grade
YuFeng floatation cell , flotator machine , Flotation machine ,
Flotation equipment, Flotation Machinery have been sold to russia
, korea, iran, pakistan market
Application of floatation machine
flotator machine is applicable for separating non-ferrous metal,
black metal, noble metal, non-metal mineral, raw body and
materials of chemical industry, which are subject to coarse
separation, swept separation, fine separation and floatation, so
the useful ore are reclaimed.
Features of floatation machine
The Floatation Machine has the advantages of large air-absorption
capacity and low energy consumption. Every cell owns three
functions: air absorption, slurry absorption, and floatation
separation, and the cells form a floatation separation loop by
itself without any auxiliary equipment, and is allocated
horizontally, which favors the change of flow. The circulation of
mineral slurry is reasonable, and can avoid the disposition of
coarse sand to the largest extent. There is self-control device
on the surface of mineral slurry, so it is easy to adjust it. The
impeller has backward-inclined upper and lower vanes, which
produce upper and lower circulation of mineral slurry
respectively.
floatation machine working principle
Flotation machine is applicable for the separation of nonferrous
metal and ferrous metals, such as fluorite and talc. The impeller
is driven by V-belts, which can bring the centrifugal effect to
form negative pressure. While extracting sufficient air to mix
with ore pulp, the machine stirs ore pulp and mixes it with
chemicals to form mineralized froth. By adjusting the height of
the flash board to control the liquid level, the useful froth can
be scraped from the loam board. The height of the strobe must be
adjusted carefully to keep the stabilization of liquid level and
scrape the mineralized froth to the launder. The impellers and
stators should be kept at a distance and should be changed when
worn. The bearing in the pump should be maintained every three
months.
