Flux cored wire D8253 for cladding welding

详情

Flux cored wire ***3 

Item Name: Wear resistant Flux cored wire type ***3   

**- Hard-facing for fan liner and blower wheel liner, mill roller 

Executive Standards: Q/ZB****3  ( Manufacturers standards )                  

Introduction of Flux cored wire ***3:

The flux cored wire ***3 is designed for hard-facing on the surfacing of fan wheel liner. the hard-facing layer is abrasion resistant and anti-corrosion when the fan is any working conditions. The cored flux is including the Ceramet, Carbide, Chrome alloy and Ferroalloy and etc. Also, the welding layer is hardness and good abrasion and high temperature resistance. This is a new welding wire for fan industry and rebuilding the cement roller mill. The welding bead is smoothly and without cracks.         

Advantage of surfacing: 

The flux coed wire advantage is including the Welding ARC table, the good bead appearance, easy for striking ARC, lower smoking and welding spatter. Many hardfacing layers is available and no cracking on the surfacing.

Chemical components ( w t. %):       

C: 0.1 ~0.*5%; Cr: 6~ *5%; Mo: <1 %; Mn: 1 ~2%; Si: < 1; others. 

Hard-facing layer hardness:  ≥HRC *0;   

Diameter of wire:         1.6mm  / 1.2mm

Packing and Package:  *5KG/ Plastic Spool with PET inner bag and Box. 

Spool Size: Outer Diameter:  **0mm;  ( Refer to picture )

Application and Instruction: Welding Current (A): **0 ~ **0A;       

{C}{C} {C}                          Welding Voltage( V): *5 ~ *0V;      

MIG Shielding Gas:         CO2 Gas;  MIG;